Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - Yuyao factory decoration standard What are the decoration materials for Yuyao factory?
Yuyao factory decoration standard What are the decoration materials for Yuyao factory?
Workshop decoration is very important. Only good decoration can provide workers with a comfortable working environment and high production efficiency. Because the factory area is large, there are many equipments, and there are strict standards in decoration, a lot of decoration materials will be needed. Let me share with you the decoration standards and materials of Yuyao factory. Let's have a look.

First, Yuyao factory decoration standards

There are many things involved in plant decoration, especially the performance, quality and price of decoration materials, which need a lot of energy to complete. In order to ensure the decoration quality, reduce the decoration cost and improve the decoration efficiency, the factory decoration must have detailed standards. Let's take a look at the decoration standard of Yuyao factory:

1, ground material

If the floor decoration doesn't need load-bearing, you can consider inexpensive decoration materials, such as anti-static floor. The foundation needs to be treated with concrete. The former has high cost and stable quality, while the latter has low price and average quality.

2. Top surface design

Generally, the top of the factory building is relatively high, so most of them use steel frames, and the top should be designed with fire protection, ventilation and central air conditioning. For the sake of beauty, the top can be decorated with mineral wool sound-absorbing board and other materials.

3. Spatial division

The internal division of the factory should be designed according to the actual use. There are many equipments in the factory, so it is not advisable to use too many partitions. Use color signs to divide areas, pay attention to the close combination of data and space, and consider the working distance between equipment area and office area, especially the interference of dust and noise.

4, clean room design

An observation window should be set on the closed door of the windowless clean room. The light reflection coefficient of indoor surface materials should be 0.6-0.8 for ceiling and wall, and 0. 15-0.35 for floor. Clean indoor walls and ceiling surfaces should be flat, smooth, dust-free, avoid glare and facilitate dust removal. The concave-convex surface should be reduced, and the angle of yin and yang should be smooth. Indoor decoration should be operated, such as plastering, and plastering standards should be adopted.

2. What are the decoration materials for Yuyao factory?

1, top material

There are mainly mineral wool sound-absorbing board and calcium silicate board, which have simple construction, low ignition point and cheap price. It is worth noting that the construction of top materials should be coordinated with fire fighting construction. Generally speaking, in the decoration of a factory building, the ceiling keel is installed first, and then fire-fighting pipes, such as smoke detectors and sprinklers, are laid on the top surface, and then the ceiling is completely sealed. In the process of installing fire fighting equipment, corresponding pyrotechnic sensors will be sprayed.

2. Ground materials

There will be a lot of ground wear in the workshop, so the choice of ground materials should be very careful, with the characteristics of wear resistance and anti-manufacturing, and the use time is long. If there are certain requirements for the bearing capacity of the ground, a layer of concrete should be paved on the basis of the original paving materials. If there is anti-static demand, you should choose anti-static floor materials, pvc or floor materials.

3, partition materials

In the decoration of factory buildings, partition materials can be used to divide different functional areas. The common materials are gypsum board and glass partition, among which the glass partition is refined into three materials: stainless steel, aluminum-plastic board and toughened. These partition materials present different decoration styles and different prices. Among them, gypsum board is widely used in factories, which has lower cost and is more affordable than others.

4. Fire fighting materials

The workshop consumes a lot of electricity and has many machines and equipment. In order to prevent fire and other dangers, we must attach importance to fire fighting construction and install a series of fire fighting equipment in the decoration of the workshop. First of all, it needs to be reported to the fire department before installation and submitted for approval after completion. The specific fire installation situation should be communicated with professional fire companies to ensure that workers have a safe working environment.

(