Construction technology and technical standard analysis of aluminum-plastic composite ceiling
1。 Construction technology of aluminum alloy slab ceiling
1 First, check the quality of the skeleton, focusing on the straightness and uniform force of the hanger, with the keel spacing not more than 500mm. If it is in a humid environment, its design needs to appropriately reduce the spacing, the lower surface of the keel is smooth without falling off, and the main body and accessories are firmly connected. , qualified can be bound.
2. The cutting piece should be cut along the cutting way, so that the edge of the cutting piece is straight and square, and there are no defects such as corners.
3。 When the board is fixed, one side (edge) of the aluminum-plastic board is placed perpendicular to the supporting keel, and the right side is suspended. When docking, the aluminum-plastic composite plate should be fastened firmly, but it cannot be pressed in place. They can start from the corner or the center line. Not suitable for simultaneous placement. Joints should be straight and wide, and should not be staggered.
4。 When bonding, the aluminum-plastic composite plate should be fastened when docking, but it should not be pressed too tightly. The seams should be staggered. Joints on both sides of the wall should not fall on the same keel. When using double-deck board, the incision of the first double-deck board can't fall on the same vertical keel with the seam of the first layer, and the double-deck gypsum board should be misspelled together.
Construction technology and technical standard analysis of aluminum-plastic composite ceiling
Second, the aluminum-plastic ceiling construction technical standards
In terms of material selection, the specifications and colors of materials used in aluminum-plastic board engineering should meet the design requirements, and aluminum-plastic composite boards should have product certificates; The surface of the decorative panel should be smooth, the edge should be neat, the color should be consistent, and the hole spacing of the perforated plate should be arranged neatly.
In the process of construction, the quality standard should be:
1, the specification, color, quality, skeleton structure and fixing method of each variety shall meet the design requirements and quality standards.
2, ceiling keel and cover plate, installation must be firm, neat appearance, beautiful, no deformation, no discoloration, no defects, no cracking.
3. The light steel skeleton shall not be bent and deformed, and the cardboard shall not be damp, warped and deformed, without reinforcement, delamination, dryness and uniform thickness.
4。 The installation of suspended ceiling is not allowed to impact or pollute foreign objects.
5。 After the installation of suspended ceiling is completed, it should be measured. In general, within the range of 10 meter, the auditorium should adopt the acceptance points with a distance of not less than 10%.
6。 The cover of patterns and floral decorations shall ensure that the patterns and floral decorations are uniform and correct after construction, the patterns at the joints are consistent, and the beads are kept straight.
On the construction technology and technical standards of aluminum-plastic suspended ceiling, Bian Xiao will introduce you here. Did you get anything? You can also log in to Tuba Rabbit to see more relevant contents and information.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~