Let Shuangfeng Tent Factory answer this question for you: (1) When the folding tent is folded, the movable convex feet on the same side should be put away at the same time, and the movable convex feet on the other side should also be put away; When you move and position, you should fasten the safety buckle on the same side at the same time, so that the whole tent can be put in. This is the whole process of collecting tents. After mastering the operation skillfully, one person can close the tent in one minute! I don't know if you have a hard look, but the actual operation is not difficult!

(2) After the mobile positioning is close to the safety buckle, two people on the same side push the mobile positioning through the safety buckle at the same time, and so does the other side.

(3) Two people on both sides should pull apart at the same time, so that the activity display tent can be easily pulled apart.

(4) After the mobile display tent is opened, it is too big to be pulled down by hand. At this time, we manipulated it, and two people stood opposite each other, putting their hands on the upper and lower rungs and pulling them together. At the same time, people retreat with the expansion of the mobile display tent until they move and locate near the safety buckle at the top of the tent.

(5) There are two height adjustment holes on the foot column, and the required height can be adjusted at will. When heightening the foot column, pull out the heightening foot column at the same time on both sides, and operate at the same time on the other side.