Prepare a plastic stick, stick a small hole at one end and six square colored papers, fold all the colored papers in half once, stack all the folded colored papers together, pierce a corner with a pin, bend the corner, continue to pierce the right corner, and then fix it. The specific operation method is as follows:

1. Prepare raw materials: a plastic rod with a small hole at one end and six square colored papers.

2. Fold all the colored paper in half once, as shown in the figure below.

3. Fold all the folded colored papers together and pierce a corner with a pin, as shown in the figure below.

4. Bend this corner again and continue to pierce the right angle, as shown in the figure below.

5. Pass the needle through the small hole of the plastic rod, as shown in the figure below.

6. Spread out six folded colored papers in turn, as shown in the figure below.

7. Finally, fix the shape with a glue stick to avoid looseness and deformation, as shown in the following figure.

Precautions:

1, follow the steps, otherwise it will easily lead to failure.

2, the strength of origami should be even, so it looks better.

Be careful when using pins.