First, the attic stair decoration design method
1. The design of attic stairs is not as simple as imagined. In fact, although the inclined attic is irregular in shape, it can achieve unexpected results as long as it is used reasonably. Top surface treatment is a complicated piece, and it is also the focus of decoration design. Usually, when designing attic stairs, natural wood materials are used for decoration.
In fact, as long as it is used reasonably, a small attic can also be of great use. For example, some sloping attics are built into a comfortable bedroom, or a study full of books, or a relaxing reception room. Let's take a look at these beautiful decoration renderings and attic stairs respectively to see what kind of attic stairs are better designed.
3. In addition, due to the structural limitation of attic stairs design, designers need to make the space higher and larger visually, and at the same time give play to the characteristics of the structure itself to produce a structural beauty of the building, which needs to be consistent with the style of the whole room. Referring to these pictures of attic stairs, we can see that the whole decoration should not only follow the principle of modern simplicity and comfort, but also take into account the irregularity of space, which brings great difficulty to the decoration. Many owners feel that there is no way to start the attic decoration.
Second, the attic stair decoration design points
1. It is very important to communicate with the stair planner and make an inquiry before installing the stairs and before all the decoration, because the stairs should be coordinated with all the decoration, style, raw materials, slope, etc. Should be considered in advance. Never think that it is enough to reinstall the stairs on the decorations. Other manufacturers usually have a production cycle of 30 to 40 days.
2. The attic at the top of the slope is absolutely not allowed to cast-in-place the floor and become a fixed structure, which is a typical illegal building. If the developer has built the floor, there is no need to worry about this problem, but if it is to be added, it is necessary to bear the load and make good use of the steel structure without changing the original structure. Otherwise, it means that you have installed a "bomb" on your head that doesn't know when it will detonate. In order to reduce noise, floor tiles are laid, a layer of steel plate is added to the steel structure, and the steel wire mesh is hung before laying.
3. In order to avoid the illusion when going up and down stairs, the height of the first step and the first step of stairs should be consistent with other steps. If replacement is needed, it should be controlled within 4 cm, preferably not more than 2 cm ~ 3 cm. The stairs should be one step higher than the ceiling. When designing the attic stairs, there should be a clearance of more than two meters, and the minimum clearance should not be less than 1.8 meters, otherwise, there will be a sense of oppression. Distance between railings: The distance between two railings should be 8 cm, and not more than 12.5 cm to prevent children from sticking their heads out of the gap.
The attic usually designs stairs, but now there are many materials and samples of stairs. So what are the design methods and key points of attic stairs decoration? You all know after reading the introduction of the above small series. If you want to know more about the decoration, please continue to pay attention.