You can try the following methods: 1, first prepare a needle-nosed pliers or vice; 2. Clamp a sorted steel wire with pliers and pull it out. Be careful not to pinch the tangled steel wire. 3. At the same time, shake the handle with the other hand, loosen the steel wire, and look at the direction of rotation. Sometimes, contrary to normal steering, the steel wire can be released, and everything depends on the direction of the steel wire on the spool. Note that in the process, hold the hand of the wire and pull it out hard. This step is the hardest part. Take your time, take more. When the steel wire is completely pulled out, you still can't loosen the pliers, let the steel wire stretch, and then slowly shake the handle to take it back a little. # # It's simple. First take down the clothes rack, tie a knot at the joint between the steel wire rope and the cooling rod, and cut it off with wire cutters if it can't be opened. There are four lids on the clothesline. Unscrew four new nuts on the cover. You will understand at a glance. Remember every step when you dismantle it. When installing the wire rope, firstly slide the two ends of the wire rope from universal to the cooling rod, then install the cover, connect the two ends of the wire rope with the cooling rod, and then slide from 10,000 meters to 10,000 meters.