What is the installation method of resin thatched tile?
Resin simulated thatch is also called plastic simulated thatch. Products are generally extruded by plastic making machine, which is not high in science and technology, but the original ecological effect is good. Now it is generally made by hand in China. Installation method: The simulation of thatched tiles is very simple: paving from the eaves down, as in the conventional tile laying method, each tile is horizontally overlapped by 2mm, so don't pay too much attention to the overlapping. It is suggested to leave a long point along the thatch line of the eaves to overlap more points and highlight the heavy effect of floating. The specific installation steps are as follows: on the 1 floor, nail the solid brick part of thatched tile along the eaves along the reference line; Second floor ratio 1 storey height1-50px; The third layer and the fourth layer are overlapped and nailed in proportion; Above the fifth floor, it will retreat upwards by about 162.5px (about the width of the retreated tile part), and so on, and the whole set of installation can be completed, showing a realistic thatched landscape effect.