Fixed plug
The fixing plug is made of soft logs (such as pine). The length of the plug is 60 mm, the cross section is square (22×22 mm), and one end is made into a thin tip.
Install curtain rack
According to requirements, drill or drill several large holes with a diameter of 30mm and a depth of 60mm. Nail the cork tightly into the hole with a carpenter's hammer to make it flush with the wall. Nail the square nail into the cork center or screw the wide cap screw into the cork center with a screwdriver, and then fix the curtain frame or panel.
Install the straight curtain frame.
When installing the straight curtain frame, use square nails or wide cap screws with the length of 100- 150 mm; When installing the flat plate, the fixing piece with the length of 1000- 120mm should be adopted; Small square nails or wide cap screws should be used when installing the round rod curtain frame. Curtains with fixed or movable curtains can be hung on the panel.
Movable curtain
For curtains with movable curtains, special bars can be fixed on the wooden board, and the curtains can move freely on the bars with a certain number of rings. In order to fix the straight curtain frame, two U-shaped nails should be screwed on the back near the edge, and the square nail head protruding from the wall should enter the arc parts of the two U-shaped nails.
Metal ring for hanging curtains
When hanging curtains, use the following metal rings: round rod metal curtain frame, use large metal rings; For plastic curtain frames with round rods, large metal rings can also be used; For wooden curtain frames, use a rotating wooden ring. In order to move freely, the diameter of the ring should be larger than the diameter of the rod, usually not less than10-15 mm.