1, red brick wrapped riser-red brick wrapped riser is a traditional wrapping method. After the red brick is wrapped, steel wire mesh and ceramic tile are pasted, but this method takes up a large space and is not recommended for small-sized families.

2, wooden keel wrapped riser-you can do wooden keel bracket first, and then nail cement pressure plate, ceramic tile. However, the wooden keel will be damp, so it is not suitable for the bathroom to wrap the riser with wooden keel.

3, plastic gusset plate, plastic aluminum plate-plastic gusset plate and plastic aluminum plate are very simple to wrap the riser, and there is no need to stick tiles outside, but the appearance of plastic gusset plate is not very beautiful, and the wrapping angle of plastic aluminum plate is relatively easy to break.

4. Light steel keel+cement pressure plate-use light steel keel as the frame, then seal the cement pressure plate, hang steel wire mesh, and then stick tiles. This method is not easy to deform.

Introduction:

1. Light steel keel-Light steel keel is a metal skeleton for building, which is made of high-quality continuous hot-dip galvanized steel strip and rolled by cold bending process.

It is used for modeling and decoration of non-load-bearing walls and building roofs with gypsum board, decorative gypsum board and other light plates as facing. Suitable for the modeling and decoration of roofs of various buildings, and the basic materials of internal and external walls and roofs of buildings.

2. Plastic gusset plate, plastic aluminum plate-plastic gusset plate: The wooden keel is provided with an external corner line, and the gusset plate is installed directly from bottom to top. Disadvantages: not beautiful enough.

Aluminum-plastic board: nail a 9 cm board on the wooden keel, and then stick the aluminum-plastic board with all-purpose adhesive. Many colors, close to the effect of porcelain.

The above contents refer to Baidu Encyclopedia-Bao Li Guan.