Whether it is Valentine's Day, Mother's Day or Teacher's Day, I believe that such a small handicraft made by myself is a perfect gift. Take the children to do it quickly!

Video tutorial

It is recommended to watch the video tutorial under WiFi.

Preparation materials: two-color embroidery thread, scissors, adhesive tape or clip.

1. Choose two kinds of favorite silk threads, cut four sections of 60 cm long in each color, and use *** 8 threads.

2. Cross-arrange the silk threads of two colors together, tie a knot at one end and leave a section of 8 cm at the head.

3. Fix one end of the knotted thread on the cardboard with adhesive tape or small clip.

4. Divide eight silk threads into two strands, four on the left and four on the right. Each color is also evenly distributed.

5. Starting from the outermost (red) on the left, weave the left and right silk threads one by one. Wrap this silk thread around the other three silk threads on the left in turn, tie the knot and pull it to the top of the wool bundle.

6. Pull a wool to the right, put it on with a rope, and then pull it to the top.

7. Continue winding the next wool until the outermost red wool runs to the middle position. The first step on the left side of the wool is completed.

8. Next, wrap the wool on the right. First, wrap the outermost wool around the other three wool threads in turn and tie the knot at the top. Tie each knot twice!

9. Wrap the outermost wool in the middle position and tie a knot between the left and right wool. (Don't forget to type each knot twice)

10, and then tie the second wool on the left and right sides in the same way. The next step is a bit special: pull up the second wool on the left (blue), wrap it around the outermost wool (red) and make two turns.

1 1, and the same is true on the other side: pull up the second wool (blue) on the left, wrap it around the outermost wool (red) and make two turns.

12. Continue the same knitting steps to knit the second and third root.

13, the left and right sides are woven in the same steps, and a small heart shape gradually emerges.

14. When knitting to the fourth row, add the special knitting method just now, and tie the second wool around the outermost wool.

15, the left and right synchronization methods are the same.

16, then weave two rows with normal knitting method, and then weave two rows with special method. Did you find a pattern? Two rows of ordinary knitting, two rows of special knitting ... and so on.

17, finally tie a knot at the end of the bracelet and trim the line neatly.

Ta da! Our heart-shaped bracelet has been made, and the pattern is neatly woven, which is simply better than the one bought outside!

Colored wool bracelet

As shown in the picture, prepare three straws with the same length and several colors of wool. Our little bracelet can start knitting.

1. Glue one end of three equal-length straws together with adhesive tape, and string a long wool in each straw.

2. Tie three pieces of wool on one end of the straw, and our bracelet knitting gadget will be ready.

3. Choose several kinds of colored wool and weave it back and forth on the straw. Star uses three colors: blue, white and red. This color combination looks very eye-catching.

4. Weave the appropriate length, and finally tie the wool at both ends of the straw together.

Mi Zhu braided bracelet

Fish bracelet

Start knitting a colorful small fish bracelet, and you can knit it with a few colored ropes. Simple and beautiful, suitable for adults and children.

Video tutorial

It is recommended to watch the video tutorial under WiFi.

Wool braided pendant

These unique and beautiful wool ornaments were woven by teachers and children themselves. Is it also appropriate to hang some such wool in the classroom in autumn and winter?

Children all like to knit these colorful wool, and it is very simple to do it by hand. Teachers can be used to exercise children's practical ability.

A 6x8cm cardboard, two cardboard strips, scissors or a knife, a ruler, wool, plastic needles, tape and branches. A ball of wool

1. Draw a line at the upper and lower edges of the cardboard 1 cm with a ruler, divide the gap of 1 cm into 12 pieces on average, and carve the marks with a knife.

2. Stick a piece of cardboard above and below 1cm.

3. Cut the wool with the length of 12, and tie it longitudinally at the mark just carved, preferably tightly.

Weaving steps:

1, cut a piece of wool about half a meter long and string it on a plastic needle or stick.

2. Tie one end of the wool to a corner of the cardboard and thread it on the longitudinal wool with a plastic needle.

3. After threading several threads, tighten the wool by hand.

4. Change several colors of wool to weave on it.

Finally, cut off the excess wool and tie the knot.

1, the teachers led the children to knit wool outside and then fixed it on the back with tape.

2. Take off the cardboard and add a branch to one end of the wool.

3. Finally, add some small decorations like wool balls.

There are many playmates who like DIY by hand in Wan Wen circle. Today, Bian Xiao will show you how to weave bracelets and how to combine beads and lines perfectly to create different visual effects. This bracelet looks small and fresh, just like petals blooming and dazzling like a crown. It seems complicated, but the knitting method is very simple. Let's study together!

Let's look at a finished product drawing first. Players can match colors according to their own preferences, and it is also possible to use beads of other colors.

Materials to be prepared when weaving bracelets include: braided rope, crystal or gem beads, colored beads, clips, scissors and lighters. These materials are easy to find and are usually available at home.

Fold the two lines in half, clamp the crease with a clip and separate four lines. The rightmost line winds around the next line to form a hook.

Winding and weaving for many times to control the tightness. The rope woven in this way looks harmonious and unified. In fact, this knitting method can also be used at the end of bracelet beads.

According to the length of beads, judge how long knitting is appropriate. You can compare the beads in your hand to see if the length is appropriate.

When the knitting length is almost the same, take off the clip and tie the lower end of the rope together.

You need to tie two hooks at the end of the rope, which is similar to the above knitting steps, except that two ropes are used to knit.

You can wear beads at this time, using the innermost thread. You can string a small bead string first, then a hand bead string, and then add a small bead string to make the whole harmony as the main purpose.

Then string beads of other colors with the outermost thread.

After putting on the outermost beads, knit another section.

Weave the matching beads into it, make it in the middle position, and tie a knot under the rope. Don't use too much force when tying the knot, so as not to affect the tightness of the braided rope.

The rope used to string the main beads is tied in reverse with other ropes to fix the position of the beads.

After the bead becomes fixed, it has been well blended with the braided rope, and the next bead can be braided in the same way. Weaving in turn will form a complete bracelet. In the process of knitting, pay attention to the control of rope tightness, and don't let it loose for a while.

Put a bead on the tail as a button so that the bracelet can be closed perfectly.

After reading the above introduction, have you mastered this innovative bracelet knitting method? Try it yourself.