Production technology of acrylic plastic light box: to make plastic light box, we must first make clear the size of the light box in order to accurately cut the materials, otherwise it will waste a lot of unnecessary materials. After cutting, the product is initially shaped according to the requirements of the product, and the graphics are in the opposite form. After that, we use edge trimmer to solve the problem of rough edges of acrylic. If necessary, you can see if it is necessary to punch holes. If not, we can choose the opposite polishing process form according to the requirements of the product. These are all done, and we have to go through a hot bend. The so-called hot bending is to change the impermanence of acrylic products into the opposite shape. This step is divided into full hot bending and integral hot bending. Finally, the acrylic plastic light box we made was bonded and packaged, and this was finished.