What is the reason why a car won't catch fire when it enters the water?
The reason why a flooded car won't catch fire is to check the spark plug first. Because spark plug is the key of automobile ignition system, and ignition system is the focus of engine work, the performance of spark plug is related to the working performance and efficiency of the whole vehicle.
The characteristic of battery power loss is that the starter starts to rotate but the speed is not enough, that is, it is weak, and then the starter just doesn't move. In winter, the temperature is low, and individual electrical appliances forget to turn off, which will cause the vehicle to fail to start, especially in winter, when it is used for a long time at short distance and low speed, the battery voltage will be lower than the rated value, and the starter will not work normally. If there is an accident, please call the service desk for help, or find a motorcade, or catch fire temporarily, and then go to the service desk to replenish electricity.
The characteristic of gasoline flow obstruction is that there is no oil pressure in the engine oil supply pipeline. This happens mostly in the morning when the temperature is extremely low, which is caused by long-term scaling of fuel pipeline. When the temperature is extremely low, water and sundries are mixed together, resulting in the fuel pipeline being unable to pass through and thus unable to start. Emergency method: put the car in a warm environment and the car will start soon; Or clean up the oil thoroughly.
What should I do if the car turns off when it enters the water?
The correct way is to push the car to a higher place without water, call the insurance company, and then drag the car to the repair shop to check the water inflow.
Cancel it. When the reactor runs at a significant reaction rate, if the temperature of the inlet drops to the lower limit of the polycrystalline region, the reaction rate will suddenly drop sharply and the reaction will basically stop. This phenomenon is called extinction. The corresponding inlet temperature is called the extinction point. Generally, it refers to a car stalling.
Water inlet and flameout are caused by water inlet in the exhaust pipe, and the pressure in the exhaust pipe is too high, which makes the engine unable to exhaust and directly suffocates the engine; Or water enters the air inlet, and the air filter is damp, resulting in insufficient flameout of the air inlet (water does not enter the manifold), and water enters the engine cylinder, so the engine cannot work directly. When the engine is running at low speed, the exhaust pressure is too high because the exhaust pipe is in water.
The empty filter element is wet and the air intake is insufficient, so it is closed (water has not yet entered the manifold). A small amount/a large amount of water enters the engine, and the engine fails to work normally/is damaged and stops. When the engine is inhibited by water, the cylinder is basically filled with water. Because water is incompressible, there is little room for the piston to rise. At this time, even if you turn on the ignition switch, the starter will not turn, let alone damage the engine. When the engine is flooded, it will inevitably turn off. Because the rainwater entering the cylinder has no lubricating effect, if the engine is restarted blindly after flameout, the engine cylinder may be scrapped. What is the reason why the car can't catch fire when it enters the water? What should I do if the car turns off when it is flooded @20 19