There are two ways to do this. If parents consider a use when the baby does not need to use the dining chair, they can refer to the following:
1. First, put the prepared milk powder can in the shape of a chair with a handle and a backrest. The handle should be shorter and then sealed with tape. This is a model dining chair seat.
2. Then prepare a hard paper sleeve, cut it according to the dining chair seat model, wrap the dining chair model, and seal it with adhesive tape (as shown below). Then you can put cotton on the base and backrest, then make a thick seat cover with idle cloth at home, decorate the seat, and finish decorating a small chair.
3. Put a milk powder can where the handle is smaller than the seat part of the small chair (horizontal or vertical, parents can adjust it by themselves). You can decorate the two milk powder cans first, and then tie them with the base (you can directly tie the two milk powder cans with the base with a wide and long belt, but try to be flat). Put a piece of cardboard on it, draw the appropriate size to match the length of the small chair, and then cut it. Glue this cardboard and two tied milk powder cans together with hot melt adhesive, so that the shape of the small table comes out. Then decorate the table with idle cloth, and the small table is decorated (as shown below).
6, in order to reinforce, you can also tie two milk powder cans and handles horizontally with the backrest, which can also prevent the baby from coming out from below, so that the small dining chair is ready. But when using it, parents have to add a small belt to fix the baby and prevent it from turning out.
If parents want to make a dining chair directly, they can put out a small sofa model with a handle and a backrest with a long handle, then fix the set model with adhesive tape or hot melt adhesive, and then wrap it with cardboard. Then prepare a piece of cardboard with suitable length and thickness and stick it on the handle edges on both sides of the small sofa with hot melt adhesive, and then you will have a general dining chair shape (as shown below); Then put cotton on it and make a condom out of idle cloth.
The first method, when the baby doesn't need to use the dining chair, can take it apart and turn it into a small sofa and a small table, which can still be used. The second one is not easy to split, and the baby can't play any other role when he doesn't need to use the dining chair. Parents can make changes according to their own needs, or they can add flexibility and their own ideas.
Waste utilization in manufacturing baby dining chairs
In life, there are many friends or leisure housewives who like to do manual work, and they all like to use some idle things at home to make some useful little things in life, which not only turns waste into treasure, but also brings a little fun to life and exercises their hands-on ability. So what can be used to make a baby dining chair? Let's take a look together.
Waste utilization, turning waste into treasure and making some daily necessities by hand require us to use our brains to think about what it can become and how to make it. In fact, you can make a dining chair for your baby with some empty milk powder cans that your baby has eaten. Or a friend who usually works as a carpenter can also make a baby dining chair out of solid wood. Or you can make a baby dining chair out of discarded stools and paper covers. There are many things in life that can be used as waste, but we just need to think seriously.
In addition, we must ensure the safety of these daily necessities, especially for babies, and we can only use them after eliminating potential safety hazards to avoid safety accidents. If babies suffer, they lose more than they gain.
Drawing of solid wood high chair and how to do it.
When the baby reaches a certain month, parents should exercise the habit of eating independently. If you hold your baby for a long time, not only will your parents' hands be very tired, but it will also be unfavorable to cultivate your baby's independent ability. Now young mothers will prepare a small dining chair for their babies to eat on. Although there are many merchants selling high chairs in the market, many handy parents will make them themselves. Let's take a look at the drawings of the solid wood high chair and the production method of the solid wood high chair.
Production drawings of solid wood high chair:
Everyone should prepare solid wood materials in advance, and then cut and assemble them. In order to ensure that the produced drawings have a high degree of understanding, we must use a ruler to measure accurately when cutting, draw lines, hand saws should follow the lines, and the wood in the same position should be of the same size.
The center of gravity of the chair must be accurately grasped, which can imitate the state of the baby sitting down. The correct way is that the baby's center of gravity will move back a little. Are these four small dining chairs? Feet? Position determination standard.
Remember to deburr after final installation. When the baby sits on it, the body will often come into direct contact with the dining chair, so it is necessary to grind off the extra wooden thorns on the edge of the board to avoid stabbing the baby. After the production is completed, the safety of the dining chair should be tested before it can be used by the baby to avoid safety accidents.