Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - Three points for attention in the installation method of Midea Midea Water Purifier
Three points for attention in the installation method of Midea Midea Water Purifier
Many people are very worried about the quality when buying water purifiers, so big brands of water purifiers are often the first choice for many consumers. For example, Midea water purifier is a brand that many owners will give priority to when purchasing, but buying a good water purifier does not guarantee the safety of use. The installation process is also very important. Only after correct installation, can we ensure that the failure will be reduced in the future use process. Bian Xiao introduced the correct installation method to everyone today by taking the beautiful water purifier as an example.

First, the installation method of Midea water purifier

(1) Preparation:

Tool preparation: screwdriver, pipe wrench, wrench, scissors, pliers, ruler, raw material belt, etc.

Unpacking: Check whether all parts are complete.

(2) Start the installation:

1. Turn off the main tap water switch and remove the connecting pipe under the faucet. Connect the electroplated ball valve to the side hole of the water inlet tee and connect the bifurcated PE pipe at the outlet. One straight port of the water inlet tee is connected with the water connected under the removed faucet, and the other straight port is connected back to the water source. A PE water pipe is connected to the water outlet of the water purifier, and the other end of the pipe is connected to the water purifier interface.

2. According to the outer diameter of the gooseneck outlet faucet, drill a corresponding small hole in a suitable place on the glass table, then install the gooseneck outlet faucet, and connect the PE water pipe to the tooth tube at its lower end. Then connect the PE water pipe to the water purifier and put it at the outlet of activated carbon. If you need to fix the gooseneck faucet on the wall, you need to use the gooseneck faucet pendant.

3. 1. Turn on the main tap water switch, water inlet ball valve and plastic flushing ball valve at the flushing port for about 5 minutes, and close the plastic flushing ball valve after there is no black water at the flushing port. Turn on the gooseneck faucet for flushing 15-30 minutes, and then flush the alcohol protection solution in the filter element (until there is no alcohol smell in the water) before normal use.

3.2. Check and turn off the cooling and heating switch, plug in the power supply to start flushing, and close the ball valve after there is no black water in the flushing port. Open the submarine sewage outlet (soft plug+nut) of the cold and hot bucket, and rinse it for 25-30 minutes in turn until there is no small white foam in the effluent. Screw on the drain nut, turn on the hot and cold tap and put some water. (Note: Only when there is water flowing out of the hot water port can the heating switch be turned on to prevent dry burning).

4. After the installation, turn on the water and debug the water purifier to see if there is any water leakage at the interface. The debugging time should be at least 2 hours to ensure safe use.

Second, Midea Water Purifier Installation Precautions

1. Determine the installation position of the water purifier: the installation position of the water purifier must be placed not far from the water meter or the main valve, and the sewage treatment must be convenient for discharge, not close to the heat source and not in direct sunlight.

2. Pipeline installation of water purifier: During the installation of water purifier, pipeline installation is very important. First, it is the sewage outlet. It is necessary to connect the pipes in the sewage pipes and then tighten them with pliers. Next, it is necessary to connect the pipes and valves, and then tighten all the pipes for full inspection, so as to be complete.

3. Installation of water purifier power supply: When installing the water purifier, the power supply must be wired according to the installation position of the water purifier, and it needs to be carried out according to the principle of proximity, so that the connected socket can ensure that the water purifier can be connected.

Nowadays, the problem of environmental pollution is becoming more and more serious, so more and more families are concerned about water safety. Although water heaters are expensive, many families still consume them. The installation method of this beautiful water purifier introduced by Bian Xiao hopes to help everyone. Although they are different models of water purifiers, the same brand still has something in common in basic installation methods. The water purifier can filter the water quality, thus making our drinking water safer. Therefore, in the water purifier,

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~