How to assemble the wedding poster frame tool: X-frame, wedding poster 1, and take out the bracket that needs to be installed on the bag. 2. Remove the bracket, spread the bottom two feet and put them on the ground. 3. Insert the other two poles into the holes in the four corners of the wedding poster. Then, take out the wedding poster as a display box at this time. 5. From top to bottom, the four corners of the picture are fixed on the small hooks on each leg of the bracket in turn. 6. Then, after plugging it in, adjust it to the appropriate position as required, and then straighten the X bracket to complete the operation. How to install pictures on the wedding poster frame? On the day when people get married and hold a wedding banquet, newlyweds always put up their wedding posters at the entrance of the hotel. If you stick the poster on the wall, it will not only be inconvenient to move, but also leave traces when you tear it off. It would be much more convenient if there was a poster stand. So what is the process of how to install the pictures on the wedding poster frame? Install the wedding poster rack, first take out the hanger to be installed from the handbag, then take out the hanger, spread the lower two legs and fix them on the ground, insert the other two legs into the holes, then take out the wedding poster to be displayed, fix the four corners of the poster on the small hook of each leg in turn from top to bottom, and adjust the X-shaped hanger. From the installation drawing, we can know the installation method of the wedding poster display frame, that is, first rotate the feet of the poster frame about 90 degrees and put it down, then tear off the part of the wedding poster pasted with sticky paper, align the two ends and stick it on, then open the plastic cover at one end of the poster, take out the hard core strip in the middle, stick the hard plastic core strip close to the upper edge of the back of the poster with one centimeter wide double-sided adhesive tape, fold it in half, then put it back in the metal tube, cover it, press the bottom end and pull the poster by hand. When in use, the three-fold metal rod placed on the X-shaped exhibition frame is taken out and connected, one end is inserted into the plastic mouth of the X-shaped exhibition frame, then the poster is slowly taken out, and the hook for hanging the poster is hung on the top of the metal connecting rod. This is the installation process of the wedding poster frame, which is relatively simple. Please follow the instructions. How to install a wedding poster shelf? Where can I find a shelf to sell wedding posters? Generally, it is an X-shaped bracket. After taking out the bracket, find a fixed point to support the X-shaped bracket, then fix the four corners of the wedding poster on each leg of the bracket from top to bottom in turn, and finally stand up. Then, how to install the wedding poster shelf and what else can you continue to understand.
How to install a wedding poster rack
1. First, take out the X-shaped frame to be installed from the bag, first support the lower part of the frame and put it on the ground.
2. Align the above two brackets with the holes of the fixed frame and insert them to support the prototype of the exhibition frame.
3. Spread out the picture of the wedding poster, and then fix the four corners of the poster picture on the small hook on each bracket from top to bottom in turn.
4. After connecting the wedding poster screen, adjust the appropriate position as needed, and then straighten the X bracket to complete the operation.
Where can I buy a wedding poster rack?
Wedding poster racks can be bought online or offline in some wedding supplies stores. In short, by
Find a corporate service and go to Pig Bajie. Com, delivery, acceptance and payment.