I. Price
The price of iron bedplate is generally 10 yuan per square meter. (Price source network, for reference only)
Two. Brief introduction of iron bed
Iron bunk beds, also known as bunk beds or apartment beds or bunk beds, are derived from wooden bunk beds. The hob bed has the characteristics of convenient disassembly, strong stability, effective use of vertical space and greatly increased space capacity. Frame beds are widely used in dormitories, such as student dormitories, factory/unit dormitories and construction site dormitories. The technology of hob machine is relatively simple, which is divided into: material, welding, painting and so on. Production requirements of roller bed: excellent welding process, no desoldering, blowhole, pinch, flash and undercut, the ripple height of welding scar is not more than 1 mm, and the angle and welding of iron frame bed head have been strictly inspected. Otherwise, it is easy to scratch clothes and quilts. The bunk bed is very important in material selection, and the thick steel hob bed is safer and more stable to use. Parkson Furniture is not allowed to cut corners for the long-term development of the company.
Iron frame bed belongs to steel furniture, which is generally degreased, acid derusted and phosphatized, and the coating is smooth and beautiful without peeling. High-quality bunk bed with iron frame can still keep the paint surface intact after 78 years of use, and can prevent paint from falling off when it is slightly collided. Moreover, the iron frame bed is thick and stable, and there is no obvious rubbing sound and shaking feeling when shaking the bed body by hand. There is no obvious rubbing sound when adults turn over in bed.
Three, iron bed composition:
1. column: made of high-quality cold-rolled steel plate and rolled by special forming line. Its front is hollow and irregular. Square pipes and round pipes cannot be used. The front and sides of the column need reinforcement. The vertical dimension after molding is 55*55mm, and the material thickness is1.2 mm. 。
2. Cross beam: made of high-quality cold-rolled steel plate and rolled by special forming line. Its facade is hollow and irregular, and square pipes or eccentric pipes cannot be used. The facade needs two reinforcing ribs. After molding, the vertical dimension is 60*40mm, and the material thickness is1.2mm..
3. Guardrail: high-quality pipe with a thickness of ￠ 19* 1.0mm is used, with a length exceeding 1.2 m and a height flush with the upper edge of the iron bed.
4. Bedframe: made of five high-quality square tubes with a thickness of 20 * 30 *1.0mm..
5. Stairs: 20*30mm square pipes are used, and the treads with the thickness of 1.2mm and 1.2 are stamped from cold-rolled steel plates, and the surface needs concave-convex lines, which can play an anti-skid role.
6. Mosquito net pole: made of high-quality pipe, with thickness of ￠ 14* 1.0mm and rubber plug at the top.
7. Shoe rack: made of 20*30mm high-quality pipe with a material thickness of1.0mm..
8. The iron bed is welded by hydride shielded welding, and the surface of the iron plate is degreased, derusted, phosphatized by electrostatic powder spraying and cured at high temperature.
9. The connecting part of the whole bed is connected by pendants (the material thickness is 2.0mm, and the high-quality cold-rolled steel plate is pressed by abrasives), and it cannot be connected by screws.
The hob bed is a kind of bed welded by electric welding machine. This kind of bed is very easy to paint, but its safety performance is poor, and it is very easy to deform, which is easy to hurt people. Most iron beds will not be used at home, because the design structure of iron beds is very simple and easy to break down. But in some dormitories and crowded places, iron frame beds will be used. The manufacturing cost of the iron frame bed is very, very low, and it can be made into various shapes, which has certain ornamental value. The iron frame bed can be used in enterprises and construction sites, saving space and cost.