On the outer packaging of LED lamps, 4W is equivalent to energy-saving lamp 6W, and LED lamps of incandescent lamps 27W and 6W are equivalent to energy-saving lamp 9W and incandescent lamp 42W. The energy saving of LED lamps mainly depends on the initial light efficiency. The greater the initial light efficiency, the more energy is saved. From the test results, the initial light efficiency of LED lamps is obviously higher than that of incandescent lamps and energy-saving lamps, and it is indeed more energy-saving.
Besides being more energy-efficient, LED lamps are safer than incandescent lamps and energy-saving lamps. This is because the power consumption of a single LED is very low, the requirements for conductive lines are not high, and there are few short-circuit faults caused by line aging. Safer, more energy-saving, and short start-up time, no electromagnetic noise, but there is a little disadvantage in terms of substitutability.
Extended data:
The use of LED24W bulb is introduced as follows:
Many ceiling lamps are also LED lamps, but LED light sources and lamps are generally made together and cannot be replaced. This also means that if the LED ceiling lamp "strikes", you can only buy the lamp again. And if you use the ceiling lamp with energy-saving lamps, you only need to replace the lamps.
If you use it in the bedroom, you can choose a warm color with a color temperature of around 3000K; Although the living room lighting should be bright, it is best to keep the light soft, and the color temperature can be around 4000K K, corridors, balconies, etc. , you can choose about 5000K products. If used at home, the color temperature should not exceed 5000K, otherwise the light will be dazzling and not suitable for home use.
People's Network-Use LED lights to prevent blue light from hurting eyes.
People's Network-Energy-saving lamp or LED lamp, which is more energy-saving?