Tent: A hiker who plays too much in one day will definitely want to experience hiking in the next two days. For two days in a row, I felt worse than camping outdoors. Since camping, you have to choose a tent.
Tent: inner tent, outer tent, support rod, ground nail, wind rope and base cloth.
Tent materials: 2 10D, 2 10T, 20D, 40D, support rods: glass fiber, aluminum alloy, 7075 aluminum alloy.
Most of the tents in the market are 2 10T (only to prevent light rain splashing). If you often go camping outdoors, it is recommended to choose fabrics (outside the tent) for more than 20 days, which can withstand moderate to heavy rain (defense coefficient is 5000mm). It is best to choose 7075 aluminum alloy for the support rod.
Then the tent was divided into three quarters and three quarters. If you like to travel long distances alone, buy a tent for one person or a tent for one or two people, such as a single-knife account or a JWS account;
If there are two or three people, buy a tent of the corresponding size. Generally speaking, the width of each person is 55 to 60 cm. Sunshine's account number is 1.4m wide, so it belongs to two people. E225 width 165cm, suitable for 2-3 people. LD 1 10 is 2m wide and there are four people. When introducing a tent for 2-3 people, it can be understood as follows: if it is thin, there are 3 people; If it's fat, two people.
Easy to carry. Carrying, if you are a backpacker, it is more convenient to use a traditional tent. After disassembling, you can put it directly into your backpack. Motorists can choose to open the tent quickly. It is pancake-shaped after folding, which is suitable for being put in the trunk. Waterproofing outside the tent, ventilation inside the tent and two essential points of high-quality tent. The most common tent coating is PU coating, especially polyurethane polymer. PU coating is a stable low temperature resistant coating, which is often used on various fabrics. The thickness and coating process of polyurethane coating determine the waterproof performance of fabric. The coating thickness is expressed in mm, which indicates the static waterproof column height of the coating under laboratory conditions. The pillar has high strength and good resilience, and the aluminum pole is superior to the glass fiber pole. At present, the best rods are carbon rods, aluminum alloy rods, glass fiber rods and iron rods (almost useless except for the army). Most aluminum alloy bars are scandium aluminum alloy, 7075t9,7001t6 from price to performance. The wind resistance of tents is not only related to the diameter of tent poles, but also related to the number of tent poles. Generally speaking, the more poles, the better the wind resistance. For example, two groups of tents with ordinary aluminum poles can resist strong winds of about 7-8. The wind resistance of the three groups of aluminum bars is about 9. In the snowstorm environment of 1 1, 3-4 sets of tents with 7075 aluminum poles can be used. The bottom of the account should be waterproof and wearable. The bottom of the account should be waterproof, firm and wear-resistant. Commonly used base materials are PE cloth and waterproof polyester cloth. PE bottom for middle and low-grade tents and waterproof polyester cloth for middle and high-grade tents. It's made of PE, similar to a low-grade snakeskin bag. The actual tents are made of PE, with waterproof membranes on both sides, including a large number of export tents. When the bottom of the tent touches the ground, it is easy to be scratched by debris such as gravel, grass roots and branches. Therefore, before camping outdoors, you must clean up the hard objects on the ground, or lay the ground with tent cloth as a protective layer. Tent floor cloth generally adopts 420D wear-resistant Oxford cloth. Choosing a tent with front and rear doors or facing the window is more conducive to ventilation. At this point, the new quick-opening tent has better design and ventilation.