Steps to make a resume with photoshop
Material preparation:
1. A personal photo (of course it looks better! )
2. Material pictures of bamboo leaves. The author is going to make a cover with a green theme, believing that cool colors can make the boss look better.
I like it. The quality of the picture should be as high as possible. The following two pictures were taken by the author with a digital camera.
Creation tool: PS7.0/CS
1. Open PS and create a new blank document named "Cover psd". The width and height are 42 cm and 29.7 cm respectively, and the resolution is 300 pixels/inch. Mode is CMYK mode. Click the menu "View → Ruler" to bring up the ruler.
Click menu view → New Reference Line to open the Reference Line dialog box, select vertical as the direction, and enter 2 1 after the position.
A vertical blue reference line will appear in the center of the picture after confirmation, so that we can distinguish the front cover from the back cover.
PS Create Resume-Set Rectangle Properties
2. Select the Rectangle Tool to draw a rectangle with the width of 1cm on the right side of the reference line. The color is grayish green (RGB: 1 94,202, 193), the mode is dark (as shown in figure1), and the transparency is 90. Select "Brush Tool", select the "rectangle" with 18 pixel strokes, with a spacing of 240%, and draw a dotted line on the right side of the rectangle just drawn to set the color deeper. The color scheme of this work,
Mainly use similar colors, so that the overall feeling is more harmonious.
3. Open the bamboo leaf material and drag it into the cover. Psd ",and click the menu" Edit → Free Transform "to change the size and position of the bamboo leaf picture. "Free Transform" is a common tool in PS, and it is more convenient to use the shortcut key "CtrlT". build
The level of the picture is above the "bamboo leaves". Use the Text Tool to type the title and some text information. Under the text "Introduce yourself"
Draw a rectangular substrate with a rectangular tool. Finally, create a new layer, use the elliptical marquee tool to delimit a circular selection, click Edit → Stroke, set the width to 2 pixels, and set the color to light green, as shown in Figure 2 after the cover is completed.
PS Making Resume-Cover Rendering
4. Create a new file with width and height of 1 pixel and pixel respectively, and 5 "content" is transparent and "OK". Press Ctr to enlarge the picture view and draw a white rectangle at one third (as shown in Figure 3).
Select all pictures ("CtrlA") and click the menu "Edit → Define Pattern", and PS will use this picture as a filling sample.
Put in storage. Close the chart without saving.
Back to the cover. Psd "and create a new layer named" white stripe ". Use the rectangular marquee tool to the left of the guide.
Sketch a rectangular selection, click Edit → Fill, select the picture just defined as a filled sample, and click OK. The effect is shown in Figure 3. Changing the color of the lower layer can change the effect of stripe display, because stripe species are transparent except white.
PS: Make a rectangle at-1/3 of your resume.
5. Click on the blank space on the "Bamboo Leaves" layer with the magic wand tool, and then click "Select → Inverse Select" to get the shape of bamboo leaves.
Return the selection to the "white stripe" layer, click the menu "Select → Transform Selection", adjust the position and size of the selection, and press.
Delete the key points, and the rectangle with white stripes becomes hollow bamboo leaves. Finally, execute menu editing → conversion → water layer.
Put it flat "and turn it over. Add a gradient background from green to white under this layer, or add some geometric patterns. pen
The photographer put a small maze to add some interest. We can also do a better job of hollowing out bamboo leaves: add a vector diagram to this layer.
Give the mask layer (menu "Layer → Add layer mask → Show All"), and then fill the mask with gradient colors to make the bamboo leaves look more layered. The front cover and back cover effect is shown in Figure 4.
PS Making Resume-Cover and Back Cover renderings
PS Making Resume-Canvas Extends Down
6. Click the menu "Image → Canvas Size" to increase the height to 39.7 cm, and the positioning method is shown in Figure 5.
I won't go into details about the specific design. The final product is shown in Figure 6. After printing, use the art knife along the red line (when making
Cut, fold and stick with double-sided tape, and the cover of your profile is finished. After opening it, my photos and introduction are presented on the left, and copies of various certificates opened by 16 are displayed in the small bag on the right.
The method of designing resume cover with Photoshop
One: Open Photoshop, click "File-New", set the height to 2 13mm, the width to 300mm (both dimensions are 3mm larger than A4 paper, which is called "bleeding" to ensure that there is no blank edge when printing), the resolution to150pixels/inch, the color mode to CMYK, 8 bits, and the background content.
Two: Download a background picture related to your major, with a resolution of 400×600 or more, to ensure clarity. Open the picture, press Ctrl+A to select all, select the "mobile tool" on the right side of the first line in the toolbox and drag it into the "resume cover", and then press Ctrl+T to adjust the background to a suitable size; Drag the background to the bottom layer in the Layers panel and set the opacity to 20%. (If you can't move the background image, you can double-click this layer in the Layers panel to open the new layer window, and click OK to unlock it. )
Third, select the T-shaped text tool in the toolbox, click on the canvas, and the cursor and text layer will appear; Select the appropriate font and font size in the font selection box under the toolbar, and then enter resume, name, graduation institution, major, telephone number and other information.
Four: If you are born in a famous family, you should highlight the status of a famous school. Download and open the school badge; Use the magic wand tool on the right side of the second line in the toolbox, click on the blank space of the Logo, and then click Select-Reverse Selection in the toolbar to select the school Logo and the text part. Use the mobile tool to drag the selected part to "graduation school" in the canvas of resume cover, and then press Ctrl+T to freely transform the Logo to a suitable size.
It is a good idea to write a "sales pitch" on the cover of your resume that reflects your own quality. The text input method is the same as just now, except that a substrate is added to achieve the beautification effect. Select "Layer-New-Layer" to create a new layer, and use the "Rectangle checkbox" on the left side of the first line of the toolbox to draw a rectangular box with an appropriate size; Then use the Paint Bucket tool to fill the selection box in red; Drag the "Sales Asphalt" layer under the layer and set the opacity to 30%. You can also add the substrate to the information bar in the same way. If you can't draw a substrate with a suitable size at one time by using "Rectangular Marquee", you can freely transform it to a suitable size by using Ctrl+T after filling the color.
Six: "File-Save As" is saved in JPG format. Print the cover with coated paper, bind it with the resume text, hand-write the personal information and make a personalized resume! Hurry up and act!
How to make a personal business card with PS Before designing a business card, we must first understand the relevant knowledge of the business card, such as specification size, bleeding size, pixel size and so on. The standard size of a general business card is: 90mmX54mm90mmX50mm90mmX45mm. Generally, the pixel is above 350PI, plus the bleeding size, so the document size set in our design must be: 94 mm x 58 mm 94 mm x 54 mm 94 mm x 49 mm
Today, take the most common size: 90MMX54MM as an example to introduce the design of simple business cards.
Open Photoshop, create a new document, set the specifications to 94 mm in width, 58 mm in height, 400 in resolution and CMYK in color mode, and then click OK. As shown in figure 1.
2. Display the ruler (view-ruler) in the new document, then drag the auxiliary line and mark the bleeding with the auxiliary line, so that the design scope will be clear. As shown in figure 2. Sometimes for the accuracy of the auxiliary line, you can enlarge the image and drag the auxiliary line, which will be much more accurate.
3.
At this point, the size of the business card is basically displayed. The next step is to add elements to the document. People's appreciation angles are different, and their aesthetics are also different. Today is just an extensive design, the purpose is to guide how to design business cards. The specific style of business cards is left to parents to design according to their own appreciation angle.
Through your own ideas, imagination, reference to other people's business cards, as shown in figure 3, pull out the auxiliary line as shown in the figure.
4._ Set the foreground color to gray (C6c7bc), as shown in Figure 4.
5. Set the pencil stroke size to 5. Then use the pen tool to draw the path as shown in Figure 5 (5- 1), and then right-click the pen tool to select "Stroke Path". In the pop-up dialog box, select "pencil" as shown in Figure 5-2, and then click OK. The effect after the stroke path is shown in Figure 5-3.
6.
In order to make the composition clear, remove the auxiliary line (except the vent pipe) that has just been pulled out.
Then drag out the auxiliary item as shown in Figure 6, tick out the range as shown in Figure 6 with the polygonal lasso tool, and then fill it in red, and the effect is shown in Figure 6.
7._, use the auxiliary line with the polygonal lasso tool to get the figure as shown in Figure 7.
8._ Put your own company logo in the position shown in Bin8. The effect is shown in the figure.
9._ Then put your company name in the position shown in Figure 9, with the font size as shown in the figure, or flexibly set the font size, color, character spacing, English name number and so on according to the length of your company name.
10. Then add the name, title and contact information in the position shown in Figure 10. The font size here is not fixed, and it can be adjusted according to your own situation, such as font size 6, line spacing 8 and so on.
How to make a resume with photoshop is a brief introduction that job seekers send to employers. Including their basic information: name, gender, age, nationality, native place, political outlook, education, contact information, as well as self-evaluation, work experience, study experience, honor and achievements, job search desire, brief understanding of this job, etc. A well-made resume is very important for getting interviews and employment opportunities.
Making a resume with photoshop is:
1. Open the ps software, and open the "File-New" white background file with appropriate size, color mode cmyk and resolution of 350dpi.
2, open the picture material that can highlight the personality, drag it in, and ctrl+t adjusts the size and position;
3. Open the lace material and decorate the resume background;
4. Type "resume", name, contact information and other necessary information;
5. "File-Save As" JPG format picture, complete.