Paper-cut course for window grilles
1, preparation work
Scissors are indispensable for paper-cutting, so we should prepare a sharp pair of scissors, which can help us cut out a neat paper-cut of window grilles. And a piece of red square paper. Paper-cutting with window grilles usually uses red colored paper. Then prepare a pencil or marker.
2, the steps of paper-cutting window grilles
The first step is to fold the prepared red paper diagonally. For these two times, paper-cutting is generally folded in half according to the complexity of the pattern. If the selected pattern is relatively simple, then folding it twice is basically enough. If the pattern is complicated, it may have to be folded in half three times, usually not more than four times, which will make it difficult to cut and the pattern will be difficult to be symmetrical. There are two ways to fold in half One method is to fold it in half directly along the diagonal twice, and the other method is to fold the corners of both sides to the middle 30 degrees after folding once.
The second step is to draw the pattern, and draw the pattern you want to cut on the folded paper-cut. You can refer to the patterns on the Internet. Generally, paper-cutting of window grilles can be cut into double happiness and birds and beasts, which you like. After drawing the pattern, I began to trim it with scissors. It is best to sketch with a pencil, so that it can be revised. People who cut paper for the first time had better not use black or colored pens to sketch, which is difficult to modify, and bad painting will ruin a red paper-cut.
The third step is to spread out the cut paper-cut window grilles, see for yourself whether they are symmetrical, whether there is any need to modify the pattern, and fine-tune them yourself. Then it's basically finished, and you can stick it on the window. Paper cutting of window grilles is very simple. You can try to cut some flowers and plants for the first time, which is relatively simple.
That's the paper-cut course for window grilles. Do you know how to cut paper with window grilles? Paper cutting of window grilles is very simple. You just need to draw according to the pattern, and you can basically finish a work by yourself. Most of the windows used by people in big cities are made of glass. You can use some colored paper specially pasted on the glass to cut them, and then you can paste them directly on the windows after cutting them. It is also very convenient to take them down. Be careful not to cut your hand when cutting paper, and the posture of holding scissors is also very important.