Tools for DIY cat climbing frame: hammer, scissors, saw, nail, board (one for each size), two tree trunks, a large piece of flannel, hemp rope, mouse and ball.

DIY homemade cat climbing frame material price: hammer, scissors, commonly used at home, free of charge; Nail at home, no need to spend money; The trunk was picked, no money; The board is chosen and costs nothing; Flannel is an old sheet at home before, and there is no money; The store sells hemp rope and silk rope, 13 yuan one kilogram, and I bought 20 yuan, which I didn't use up; Mouse, ball, five oceans; Total cost (excluding labor) 10 yuan!

DIY homemade cat climbing frame materials and purchase location:

Board 28*24* 1cm, 43*35*2cm (this should be easy to find).

PVC pipe, 7.5cm in diameter and 44cm in length (this can be bought in a small shop selling building materials and hardware, such as a shop 30 meters west of Huapu Supermarket outside Chaoyangmen).

60 meters of wool rope (we'd better buy more, we can't remember how many meters we bought at the beginning. This can be bought together in the shop where PVC pipes are bought. If you want better quality, you can go to the famous hemp rope shop in Xisi, but the price is not cheap. I heard that a 20-meter rope needs 26 yuan). The cloth covered on the cat climbing frame should be brightly colored (it is sold in any cloth shop)

The diameter of the post of the cat climbing frame is 7cm (as long as it can be inserted into the PVC pipe), and there are 6 pieces of 7cm thick round wood (2-3 pieces that are not so thick can be glued together). It doesn't seem to be sold, please handle it yourself)

Sand is about 10-20 kg (depending on whose house is decorated nearby, give up old face and get points)

Six screws, preferably 5 cm long.

2 bottles of latex (you can buy both when you sell PVC pipes)

DIY homemade cat climbing tool:

Punching machine, electric drill, nail gun, knife, screwdriver.

Making method of DIY self-made cat climbing frame;

DIY self-made cat crawler steps 1: Use a hole opener to open a hole with a diameter of 7.5cm and a depth of 0.5cm in one corner of a 28*24* 1cm board. Make a hole with a diameter of 7.5cm and a depth of 1cm on the diagonal of a 43*35*2cm board (half the thickness of the board, don't punch through). Another 43*35*2cm board has the same hole as the last one, but the hole direction is opposite. On the back of a 43*35*2cm board, a hole with a depth of 7.5cm and 1cm was opened at different angles, and a big hole with a diameter that a cat could drill through was opened in the center of the board.

DIY homemade cat crawler Step 2: First, fill two PVC pipes with sand, and put two 7cm thick logs in each pipe and stick them on both ends of the PVC pipes. Use an electric drill to make a small hole at both ends of the PVC pipe (together with the wood inside), drop latex into the small hole, and then insert one end of the rope into the small hole with a needle and other slender things. Apply glue to the pipe and start winding the rope (pay special attention to your hands when winding the rope, my father's hands have worn three big bubbles, so it's best to wear gloves). The rope must be wrapped, otherwise the cat will be easily caught in the future. When the rope bypasses the small hole at the other end of the pipe, the rope end is stuffed into the small hole by the above method. Note that when winding the rope, both ends of the PVC pipe are left as deep as the opening of the wooden board, so as to insert the wooden board later.

DIY homemade cat climbing frame Step 3: First, apply glue on the board, wrap all the boards with cloth, then nail the edges of the cloth firmly with a nail gun, and cross out the opening of the board with a knife.

DIY homemade cat climbing frame Step 4, the following is the assembly. Insert two pipes filled with sand into two holes of a 43*35*2cm board, and then insert another board of the same size into the pipes from above (the board with holes on both sides is placed on it), so that the lower layer is ready. Insert another pipe into the hole on the back of the first floor, and insert a 28*24* 1cm board at the other end of the pipe. I forgot one thing. After inserting the tube, screw the screw in from the other side of the plate with a screwdriver and fix it. In addition, you can use an electric drill to drill a small hole on the board of 28*24* 1cm, cut off a piece of 20cm rope and stick it in the small hole. Cats like to play.