Midea intelligent rice cooker cooking method
Ingredients: a bowl of rice and a bowl and a half of water.
Steps:
1, Taomi, put the washed rice into the rice cooker,
2. Put in the right amount of water.
3. Then clean the water around the inner container of the rice cooker, otherwise there may be the danger of electric shock.
4. Then, put the liner into the rice cooker and cover it.
5. Plug in the power of the rice cooker, press the power button and start steaming rice.
6. It takes about half an hour to 40 minutes for rice, and the indicator light of the rice cooker will light up.
7. When the rice cooker will automatically trip to the heat preservation state, it means that the rice is steamed. You can start eating in about 10 minutes.
How to set the automatic cooking function of Midea rice cooker?
Something that needs to be cooked first, such as porridge. Press porridge first, then press make an appointment twice. Generally, it will appear on the display for several hours and minutes, and then press+or-to adjust. Press start again.
The key of reservation function is that the time of reservation is longer than that of the selected function. Otherwise, it will start heating immediately. For example:
It takes an hour at most to make an appointment to cook. Select the cooking function, then the appointment, and then press+/-to select the time. The time is 1, and heating will be started immediately. The time is 2, that is, heating starts in about one hour, and cooking ends in two hours.
It takes up to two hours to make an appointment to cook porridge. Select the porridge function, then select the appointment, and then press+/-to select the time. The time is 2: 00. Start heating immediately. The time is 3: 00, that is to say, it takes about one hour to start heating, and the porridge will be cooked in 3 hours.
How long does it usually take to cook a beautiful rice cooker?
The cooking time of a rice cooker depends on how much you cook. Generally, if it is half cooked, it takes about 15 minutes for porridge and 20 minutes for rice. But the new high pressure lasts for 8 to 12 minutes. It usually lasts 30 to 45 minutes. These are all better for me, because the cooking time is different because of the different quantity and ingredients.
Common sense of saving electricity in rice cookers
Rice cookers are big consumers of electricity in household appliances. If used and maintained improperly, it will greatly increase power consumption. So how to save electricity?
1. When cooking, it is best to soak the rice in water for about 15 minutes, and then put it in the pot, which can greatly shorten the cooking time, and the cooked rice is particularly fragrant.
2. Make full use of the waste heat of the electric heating plate. When the rice is boiling, turn off the power switch for 8 to 10 minutes, and make full use of the residual heat of the electric heating plate before electrifying. The red light of the rice cooker turns off and the yellow light turns on, indicating that the rice in the rice cooker is cooked. At this time, the power switch can be turned off, and the heat of the electric heating plate can be kept warm for about 10 minute.
Never use the rice cooker as an electric kettle. Electric cookers and kettles with the same power also burn thermos boiling water. It only takes 5-6 minutes to use an electric kettle, while it takes about 20 minutes to use a rice cooker.
Avoiding the peak power consumption is the best way to save electricity. When the voltage of the rice cooker with the same power is lower than its rated value 10%, it is necessary to extend the power consumption time by about 12%, and it is best not to use it or use it less during the peak power consumption.
5. Keep the inner and outer pots clean. If the rice cooker is used for a long time and is not cleaned in time, a layer of oxide will gather on the bottom and outer surface of the inner pot. Soak it in water and wipe it with coarse cloth until it shows metallic luster.
6. The bottom of the inner pot should keep the best contact with the electric heating plate, the inner pot and the pot cover. If the inner pot is deformed, that is, concave or convex, it will affect the good contact of the bottom of the inner pot and should be corrected in time.
How to correctly repair rice cookers
The maintenance practice shows that the phenomenon of regional melting deformation of electric heating plate of rice cooker occurs from time to time. This paper briefly introduces the causes of melting deformation of electric heating plate for reference.
When the rice cooker works normally, the heat of the electric heating plate is continuously transferred to the water supply, and the water temperature in the pot gradually rises to about 98℃. When the temperature of the electric heating plate rises to 103℃ after the rice is cooked and dried, the temperature-sensitive magnetic steel installed in the center of the electric heating plate loses its magnetism when it reaches Curie point, and the lever of the switch assembly automatically drops, cutting off the contact switch and turning off the main power supply. The temperature in the pot drops slowly. When the temperature drops to about 70℃, the bimetallic contact thermostat is connected in parallel at both ends of the switch assembly. Some rice cookers connect a resistance wire thermostat in series in the electric heating plate to achieve the purpose of automatic heat preservation.
When the rice cooker is used for a long time, due to the failure of the rusting action of the magnetic steel or the change of the position of the contact switch of the thermostat, the electric heating plate will not be automatically powered off, but will always be in a heating state. When the temperature rises to 185℃, the temperature fuse is blown, which disconnects the power supply circuit, thus achieving the purpose of protecting the electric heating plate and other components.
When the rice cooker fails to heat, first unplug the rice cooker. If 185℃ fuse is found to be damaged, it is necessary to continue to check the cause of the damage, focusing on the magnetic steel in the center of the electric heating plate. Observe whether it rusts and moves flexibly; Check whether the position of the bimetallic contact thermostat has changed and whether the contacts are stuck. After checking that there is no abnormality, replace it with a 185℃ temperature fuse. The contacts at both ends of the fuse must be tight to prevent the circuit elements from being damaged due to poor contact. Never replace the 185℃ temperature fuse with a wire when repairing the rice cooker. Only in this way can we prevent the occurrence of combustion accidents.