It depends on the specific situation. If your vehicle has been registered after color change, you don't need to tear off the sticker, which will not exceed 30% of the body area. If your appearance sticker covers more than 30% and is not filed, it will be torn off, otherwise it will not pass the annual inspection. Except for the color-changing film or adhesive, all other unrecorded modified parts need to be removed and replaced with original parts. If you take the manufacturer's finance when you borrow money, you can call the 4S shop directly and ask them to borrow the green paper from the manufacturer. With a bank loan, there is no way. Only by paying off the loan can you change your color. Can protect the original car paint to a certain extent. In particular, the color-changing film using imported glue has a good protective effect on the original car paint.
There is no need to destroy or thicken the original car paint like painting, which is not conducive to the protection and use of the original car paint. If a new car uses a color-changing film, if the color-changing area exceeds 30% of the car body area, it should be filed with the vehicle management office or the driving license should be renewed according to regulations, so as not to bring trouble to the traffic police in Lu Yu. Generally, you don't need to pull flowers outside the car, just put up a big body advertisement for the record. Car flower painting used to be commonly known, but now it is changed to car sticker, which originated from racing.
The working environment of the sticker chart is between 15℃ and 30℃, because the film will become larger and the wet film solution will evaporate quickly when the temperature is too high; Too low temperature will affect the flexibility of the film, thus affecting the bonding effect. Thoroughly clean the body surface with water and neutral detergent. In order to make the color strip stick correctly, the surface of the car body must be free of dust, wax and other dirt. The sticker map is divided into three layers. The backing paper, PVC sticker and transfer film are all protective films, and the surface protective film is removed after the final completion. In the process of pasting, be careful not to pull the sticker hard to prevent stretching deformation.