1. Clean the car body and keep it dry.
2. Determine the location that needs to be posted.
3. Stick it slowly, scrape it with a tool (or bank card) and uncover the back paper.
4. After pasting, scrape and press it several times.
5. Don't let the car sticker and the car body have any separation or protrusion. Wet sticking method-Apply wet sticking method to car stickers or large car stickers [recommended for two people to operate] Step-Use tools: watering can, clean rag, scraper, art knife and air duct.
1. After cleaning the car body, spray water on the parts of the car body that need to be pasted with a watering can-mainly to reduce the stickiness of the sticker and facilitate the adjustment of the position.
2. After determining the position to be pasted, peel off the transfer film (transparent plastic film pasted on the reflective sticker) and the car sticker from right to left [or from top to bottom] and press it on the car platform with a rag, then peel off the back paper and flatten it with a rag while pasting.
3. When encountering the door handle or bumper strip, cut the package or remove it according to the situation.
4. Adjust and determine the approximate position of the figure in time, scrape off water and bubbles repeatedly with a scraper, and scrape obliquely from right to left when using the scraper; Finally, tear off the transparent transfer film.
5. When the door meets the seam, separate it with a utility knife and wrap it inward.
6. Try to dry the water in the car sticker thoroughly. If possible, it can be heated and dried moderately with an air duct. Suggestion: Try not to be exposed to the sun within 24 hours, and it is not advisable to wash the car within 48 hours.