Roewe 350 light switch diagram, Roewe 350 light description.
Roewe 350 uses a lever light switch. The basic width indicator lamp, tail lamp, instrument cluster lamp, headlight, fog lamp, turn signal lamp and high beam lamp are all integrated on it, which is easy to understand. The warning light switch is located in the middle of the center console. Roewe 350 is also equipped with the function of manually adjusting the lighting height of headlights. According to the change of the number of passengers in the car and the luggage carried, the illumination height of the headlights can be adjusted by turning the knob, so that the light of the headlights can illuminate the road in front of the car with a sufficient distance, without dazzling passers-by or other vehicle occupants (especially drivers). The car light can not only illuminate, but also remind you to communicate with other vehicles when driving, for example, the green light is on, but the car in front does not go. The flashing headlights remind that if the car wants to merge, the flashing headlights indicate agreement or even flash to refuse. There is something wrong with the car in front or nearby, but when the owner is not paying attention, flash three times to remind him. When the distance between cars is too close, step on the brakes and light up the brake lights to remind you. There is a high beam in front of the car at night, and two headlights flash to remind each other to remind pedestrians or non-motor vehicles to pay attention.