Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - How to install the ceiling curtain box
How to install the ceiling curtain box
In the construction technical disclosure of hard installation construction, it is necessary to pay attention to whether it is necessary to reserve curtain boxes and where to reserve curtain boxes. At the same time, pay attention to the size of the curtain box to be reserved accurately.

Of course, you can also consider using Roman poles or "curtains" to cover the exposed railway tracks.

If the size of the curtain box is inconsistent with the curtain design, it is necessary to communicate with the hard-fitting constructor or responsible person according to the actual needs and adjust the size according to the needs of the curtain designer.

1 back material of construction site

Pay attention to confirm the construction materials in advance before checking the curtain installation point.

If the wall or top surface corresponding to the installation point is decorated with materials with relatively weak load-bearing performance, such as gypsum board, and the fabric of the curtain is relatively heavy (especially some flannel with more folds), the gypsum board cannot bear the weight of the whole curtain, so it is necessary to communicate with the fine decoration design or construction unit in advance to reinforce the gypsum board to ensure the load-bearing capacity.

2 machining point

Curtains are generally divided into top-mounted and side-mounted, and the fixed point of the side or bottom of the weak side-mounted is on the wall. Need to pay attention to: confirm whether there are hollow bricks behind this point; Or where its keel is fixed and whether it can be installed.

If the installation material is gypsum board, it is necessary to check and confirm the details of the joints while checking the drawings, so as to reinforce them in advance.

3 size specification

Curtain boxes also have their own sizes, and there are many specifications.

Manual single-layer curtain box, the width is generally between120-150 mm.

Single-layer electric curtain needs attention because it is equipped with a motor: the width is generally 180-200mm.

It should be noted that if the owner or customer needs to install electric curtains, the soft-fitting designer should reserve the wires needed by the motor when checking the hydropower drawings.

Double-layer hand-made curtains are usually a layer of cloth and a layer of yarn. Note: the dimension width should be 150-200mm.

Generally speaking, the double-layer electric drive should be at least 250 mm If there are many folds in the curtain, the width of the curtain box should be 300 mm, so as to ensure that there will be no curtain body accumulation when the curtain is pulled up.

When designing the size of curtain box, we should also pay attention to its aesthetics and permeability.