Various types of car buckles can be disassembled as follows: one is that there is a groove at the top of the buckle, which can be taken out by rotating with one word; There is also a screwdriver with a V-shaped notch on the flat edge. There is also a kind of buckle with the original wedge in the middle, which needs to be taken out first, otherwise it will destroy the buckle; If you want to be safe and keep the integrity of the buckle, you can slowly pull it out with a special tool or a flat screwdriver, and pay attention to the plastic buckle to prevent damage. Don't worry too much about the damage or breakage of the buckle, unless you make it big, you really can't get out. Even if the buckle is broken, a buckle is only a few cents. A treasure is sold online. Don't worry about pulling out the card holder too hard, because this thing has no base and is directly inserted into the hole of the metal plate, so don't worry about damaging the base. Removing the belt buckle is a simple and laborious task. Just pull it out patiently and slowly, bit by bit. (Photo/Text/Photo: Du Fanshi of Pacific Auto Network)