When shooting movies, we always have to correct the white balance in advance, so that the color of the shot picture can be the closest to the real color. The general way to adjust the white balance is to put a piece of A4 white paper in front of the camera lens, and the camera aims at the white paper to calibrate the white balance.

I won't talk about the specific operation method, because the white balance adjustment button of each camera is different. After adjusting the white balance, we can start shooting, but a good photographer will still notice the color temperature, which cannot be ignored. Only by mastering the knowledge of color temperature correctly can we control the color temperature well. In a word, white balance and color temperature are two important elements that must be considered when shooting movies.

But even if you don't notice this problem when shooting, don't worry. There are two reasons: first, some people don't care about white balance and color temperature, and have no requirements for picture quality. This kind of person just needs to play automatic gear, and he doesn't care about it at all! This phenomenon mostly comes from wedding photography, because of the low price and the ignorance of customers, this phenomenon can prevail! Many people just need to watch their wedding documentaries and all their relatives and friends. After all, customers are not professionals. After all, the first time I saw their performance at the wedding, there was always a sense of inexplicable excitement and excitement, so I ignored these basic elements. This feeling disappears when they watch their own movies in a few months or half a year. At this time, they don't feel so good watching their own films! It's too late to regret, because there is no second chance! So most people just forget it, put the CD in the corner and stop appreciating it. This is a great regret in life. In order to avoid this regret, we can only rely on the practitioners in the wedding industry. When you are filming a couple's wedding, we are not only recording their wedding process, but also recording their happy moments! When the young wedding camera slowly experienced the baptism of years, it became a vicissitudes of life.

Tools/raw materials

Eddis film

Steps/methods

1

Adjust white balance

2

Adjust the color balance

three

Add widescreen

four

Add old movie effects

This shows that the old movie effect only needs to choose the edge darkening.

Matters needing attention

In this way, you can imitate a certain film effect, just adjust it at will. After reading it, you just need to remember that we need to adjust the white balance and color balance, and also add widescreen and old film effects.

Here I want to focus on the method of adjusting white balance in ED, add a white balance filter, select Auto, and then click the white part of the screen with the mouse. If you want to achieve other screen effects, you can click on other colors.

Only in this way can other effects appear. In fact, there is no fixed pattern of film color matching, and the color of the picture is mainly adjusted according to the needs of the plot. For example, when shooting a happy and warm picture, it may be adjusted to warm colors to reflect the warmth of the picture. Take a cold picture, obviously you can't use warm colors, you must use cold colors!

Therefore, the color matching is determined according to the needs of the plot. There is no fixed uniform pattern and then add a color balance filter. When adjusting the color balance, it still needs to be adjusted according to the plot. However, there are several points that must be adjusted. Of course, this is also based on personal preferences and the needs of the plot, low chroma, low brightness, and correct contrast. Some people like the silver-gray metallic picture when assembling, and this method can be used. Now it's widescreen and old movie effects, which I think everyone will use.

The widescreen ratio is: 1.85: 1. There are several other proportions, mainly depending on the film. When adjusting, you can adjust freely according to your own habits. If it is not shown in the cinema, there is no need to pay attention to this ratio. Now we are using the old movie filter. Just click the edge to darken, which will make people feel like a movie visually!