Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - How to DIY crystal nail?
How to DIY crystal nail?
Standard production process of crystal armor!

1. Disinfect yourself and your guests' hands with hand disinfectant.

2. Wash off the nail polish on the customer's nail surface and trim the front edge to a suitable length.

3. Grind the nail surface vertically with Grey Wolf, and sweep off the nail clippings on the surface.

4. Sterilize and dry the nail surface with EZ Bond, and then apply another layer after the first layer is dried.

5. Apply the adhesive after it dries, and apply another layer after the first drying.

6. Both sides of the paper tray at the front edge of the nail should be connected, and the radian of the paper tray can be appropriately trimmed according to the radian of the front edge of the nail. The paper tray should be glued to the nail.

7. Place the first crystal powder on the leading edge and the extension. Tile with a crystal pen to the appropriate length and thickness. Note that the two sides should be connected with natural nails.

8. Put the second crystal nail powder behind the first pen, and pat it naturally with the first pen, which is less powder than the first pen.

9. After the second stroke, that is, the third crystal powder of the epidermis prescription, the powder amount is small and the thickness is thin. Tap the brush lightly to connect with the front crystal powder to form a natural radian. Be careful not to let nail powder flow into the nail groove and under the epidermis, and draw it with a pen tip at a distance of 0.5mm from the skin.

10. Apply the fourth nail polish to the uneven surface (usually in the middle area). The nail polish should be moist, and the surface should be adjusted to a flat state with a pat brush.

1 1. When the nail body is 80% dry, you can squeeze the C arc.

12. When the nail body is dry, decorate the shape with white tiger, and Grey Wolf will polish the back edge and surface. A gray fox grinded off the surface.

13. Dust removal, nutrient oil coating and polishing. Polish the nail surface with shark first, then polish it with whale, and the order is black, white and gray.

14. After cleaning the nail surface, you can apply UV-30 to protect the nail surface and increase the luster.