1, using a commercial packaging ribbon with a width of about 2 cm. Controlling the width to 2 cm is more convenient for sizing, and it is not easy to brush out gaps when sizing. Ribbons with widths of 2 cm and 1 cm are used in the tutorial.

2. Cut the ribbon into a section of about 10 cm, and pay attention to the direction of cutting the ribbon.

Generally speaking, a ribbon with a width of 2 cm or more will have a very thin thread with a texture similar to that of nylon on one side. After this thread is deleted, you can proceed to the next step. Most of 1 cm can be directly extracted.

4. As soon as this nylon wire on the side is pulled, you can "pull" a small head with the wire to be pulled later. As long as the drawing direction is correct, this nylon yarn can be drawn out smoothly.

You don't need to leave the nylon thread on the side, take a whole one from the ribbon.

6. Then you can extract the silk row. In the process of extraction, special attention should be paid not to disturb the silk row.

7. For the ribbon with the length of 10 cm, it can be extracted to about 8 cm, and it is necessary to keep the ribbon of about 2 cm, which is convenient for sorting and shaping.

8. After drawing the required length, just disconnect the line directly.