1. The specifications of curtain box are about 100 mm high, and the width is determined according to the number of curtain rods used. The width of single curtain box rod is 120 mm, and the width of double rods is greater than150 mm. According to the design requirements, the shorter length should exceed the window width by 300 mm, and both sides of the window should exceed150 mm.
2. The curtain box is made of large core board and butted with dovetail plum blossom adhesive. If the decorative surface is coated with clear oil, the decorative plate with the same material as the window frame cover should be pasted, and the pasting surface is the outer side and bottom surface of the curtain box.
3. Through-wall curtain boxes can be directly fixed on both sides and the top surface of the wall. Non-through-wall curtain boxes should adopt metal brackets, usually iron brackets, which have been embedded in the structural construction and can also be directly fixed on the wall and the top surface.
4. When fixing, punch holes at the fixing points, place plastic expansion pins and fix them with screws. In order to ensure the smooth installation of the curtain box, the distance between the two sides of the curtain box and the window opening is equal, and the front end of the installation should be elastic. After the curtain box is installed, the facing construction will be carried out, and the curtain box after installation should be protected to prevent pollution and damage.