1. First, erect steel pipe columns at the four corners of the bungalow roof and fix them. 2. Then connect the four erected steel pipes with small I-beams, thus forming a rectangular rectangle. 3. Then add angle iron to the rectangle to make it stronger. 4. Finally, just lay colored steel tiles and reinforce them.

When making a square colored steel tile roof, it is necessary to measure its length and width first, and then buy it according to the measured data. When buying colored steel tiles, we must pay attention to the quality and be qualified, otherwise problems will easily occur after installation. After installation, you must check the firmness of each connecting part to avoid falling off or loosening.

What should I pay attention to when installing colored steel plates?

1. After the color steel plate is transported to the construction site, the relevant acceptance work must be done well. For example, check the relevant certificates and certificates of products and go through the acceptance procedures. At the same time, there should be no scratches on its surface, and its size should also meet the requirements on the design drawings. If there are scratches, the contractor will do technical treatment after the protective film is removed.

2. When installing the color steel tile, the plastic protective film on the surface of the wallboard shall not be torn off to avoid collision. In addition, the accessories and various materials used in the construction must be strictly checked to see whether their specifications and performance meet the construction requirements, and those that fail must be strictly used.

3. When installing the color steel tile, the gap in the clean area must be sealed with silica gel. However, before gluing, the gap must be cleaned, and there can be no impurities and oil stains in it, so as to keep its sealing performance unaffected.