Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - Wedding sign making
Wedding sign making
Whether it is an indoor or outdoor wedding, the wedding logo is an indispensable wedding navigation and the first impression of the guests on the wedding. Newcomers may wish to follow the steps of making wedding signs and make a personalized and creative wedding sign for your wedding.

First, prepare items.

1, newspaper;

2. Polished sandpaper -2.5 inch pine board;

3. Blache Nuo. 1;

4. A quart of water-soluble matte pigment (e.g. blue pencil)

5. Template (optional);

6. Fine round head brush;

7. 0.5 pint of black water-soluble matte pigment;

8. Flower-shaped stickers;

9, carving knife;

10, slender pine pile;

1 1, hammer;

12, only 1.25 electroplated shingles.

?

Second, the steps

1. First, spread a newspaper at the bottom, and finely polish the whole pine board with sandpaper until your fingers touch the surface and edge, and you can't feel it. Then carefully loosen the front and edges of the board with a blue paint brush.

Reminder: When brushing, you must use a brush with a width of 1 inch. Brush a straight line on the surface of the board. After drying, brush the back again in the same way. After the board is completely dried, brush the front, side and back of the board again.

2. When the paint is completely dry, write the slogan you want to write with a pencil, such as "wedding", or buy a prepared font template. Then carefully trace along the pencil mark with a brush coated with black pigment.

3. Cut the sticker into the pattern you need, leaving a blank of about 0.5 inch. According to the instructions when buying stickers, stick the stickers and press them hard, then cut off the excess parts with a knife.

4. Put the painted pine board face down in a clean and flat place. Choose its middle position, put the stake 2 inches from the top and fix it with nails. You're done!