Required materials: used red envelopes, scissors, stapler, double-sided tape, red rope, self-woven tassels or Chinese knots.

Specific steps:

1, the red envelope is half as shown in the figure, and the 12 envelope that needs to be folded is reserved.

2. Divide the folded envelopes into four groups, seal the envelopes in each group at the blue point in Figure 2 and connect them with a stapler. The shape of each group of sealing envelopes is shown in Figure ③, and two groups (one for the bottom of the lantern and the other for the upper cover of the lantern) need to be spliced.

3. In the end, four interest seals are useless. We made a rectangular peripheral splicing along the bottom of the welfare seal. As shown in Figure 4, the benefit seal of the blessing character is blue and the connection point is blue.

4. After the periphery is connected with the bottom, the other side of the periphery is connected with the upper cover in the same way, and the lantern is basically formed. The final effect is shown in Figure 5. The last corner is difficult to nail, so you can stick it with double-sided tape, as shown in Figure 6.

5. It is best to put a needle on the top and bottom of the seal, cross the red rope, and hang tassels or Chinese knots.

6. Make eight butterflies with red envelopes, as shown in the figure.

7. Form a circle, make a reservation, and then make three identical spares.

8. Make a big one with sixteen red envelopes and make a reservation.

9. Fold the small lanterns made of eight red envelopes on the big lanterns made of sixteen red envelopes.

10. Lift the lower corner of the small lantern and stuff it between the two corners of the big lantern.

Stapler puts three layers-small-big-small, respectively according to the order that one corner is sandwiched between two corners.

1 1. Take out the red rope, needle and decorative bow and order a small red envelope.

12. After knotting the red rope, separate the two strands and put them on the top of the red envelope.