Preparation materials: 3 sheets of A4 paper, wool, double-sided adhesive tape, scotch tape (or hot melt adhesive) and scissors.

1. Divide yellow A4 paper vertically in two, and then fold it evenly. Everyone should be able to fold this. It doesn't matter if they don't want it. Sister Shu will give you a video tutorial on sewing hats.

2. Two pieces of paper are folded in half and fixed together with double-sided adhesive tape.

3. In order to improve the aesthetics of the paper fan, you can make a small mark on the paper fan in the second step to separate the front and back. After the second step, turn the crease to the other side, and then stick two pieces of double-sided tape on both ends.

4. Cut two pieces of wool about 25cm long and stick them in the middle of the double-sided adhesive tape shown in Figure 3.

5. Fold the bottom of the fan and fix it with double-sided tape.

6. Cover the green A4 paper with a piece of double-sided tape, tear it off, and then roll the bottom of the paper into a paper stick with a reversing shovel (pay attention to the short end cover double-sided tape of A4 paper, and pay attention to control when rolling).

7. Cut the third piece of A4 paper into two rectangles with the size of 1/4, place them horizontally, and stick double-sided tape at one end.

8. Roll the green paper roll as shown in Figure 8 into a paper tube and fix it with double-sided tape. Note that the rolled paper tube should not be too tight or too loose. It is slightly larger than the paper tube below and can be moved.

9. After Figure 9 is fixed, wrap the paper tube in A4 rectangle of 1/4. This kind of paper is decorated with wool, so there is no limit to the way of sticking double-sided adhesive. Excess wool can be wrapped in dark green paper or cut off with scissors.

10. Cut the remaining half piece of A4 paper into a square, fold a bow or a decorative origami like love, and fix it on the pipe, so that the decoration of the wand will come out.