1. Preparation materials and tools: bed curtain bracket kit, screwdriver, electric drill, screws, wall nails, level meter, etc.

2. Measure and mark the position: measure the height of the bed head and the end of the bed with a level meter to ensure that the bed curtain bracket is installed horizontally. Mark the position of the head and tail of the bed for alignment during installation.

3. Install the bedside bracket: align the mounting plate of the bedside bracket with the position marked by the bedside, and fix the bracket on the wall with an electric drill and screws. Make sure the fixation is firm and the bracket is horizontal.

4. Install the bed end bracket: according to the same steps, align the mounting plate of the bed end bracket with the position marked on the bed end, and fix the bracket on the wall with an electric drill and screws. Also, make sure the fixation is firm and the bracket is horizontal.

5. Install the cross bar of the bed curtain bracket: insert the cross bar into the groove of the bracket at the head of the bed and the end of the bed to ensure that the cross bar is fixed on the bracket. If you need to adjust the length of the crossbar, you can cut it as needed.

6. Hanging the bed curtain: according to the type of the bed curtain, hang the bed curtain on the crossbar of the bed curtain bracket with corresponding hooks or rings. Make sure that the bed curtain is flat and firmly hung on the bracket.

7. Inspection and adjustment: After installation, carefully check the stability and layering of the bed curtain bracket. If it is loose or unstable, adjust and repair it in time.

I hope the above installation tutorial will help you, and remember to pay attention to safety when operating.