1, collecting materials. To make a big bow, you need to prepare a steel wire belt about 4 inches (about 10 cm) wide and 3 yards (about 2.74 meters) long.

2. First, be the central ring. Connect the two ends of the belt to form a ring. Please make sure that the ribbon faces outward. Pinch the bottom of the ring with your thumb and forefinger. Remember, the size of the ring determines the size of the final bow. Twist the bottom of the first ring tightly into a bundle, making sure that the belt faces outwards. This is the secret of making beautiful bows.

3. Then, start to knit two loops. On one side of the original middle circle, weave the second circle. During this period, hold the first circle with your thumb and forefinger, and then twist the tail into a strand to ensure that the front is facing outwards. On the other side of the middle circle, weave the third circle. In this process, you still have to fix the bow shape with your fingers, and finally, you have to tighten it.

3. Continue to weave rings. According to the above method, continue to weave rings, keep the shape with your fingers, and remember that each ring should be tightened last, and there are four or five rings on each side of the central ring.

4. Fix the bow with silk thread. Take out the U-shaped floral silk thread and pass one end of the silk thread through the circle in the center of the bow, so that there is one silk thread on each side.

5. Loosen the bow a little. Take some time to pull out all the rings (one to the left and one to the right) to form a round flower shape. Tighten the two wires to fix the lower plate of the bow and ensure that all the rings are fixed in the correct position.

6. Cut off the end of the ribbon. Cut off half of the larger ring hanging under the bow to form the ear of the bow. Cut the end as short as possible to the length you like, and cut the end into a bevel or dovetail shape.