Overview:
It is generally recommended to consider these brands when choosing micro-trucks, provided that the body structure is non-loaded; The so-called non-load-bearing means that the car body structure contains an independent chassis, and the steel plate frame does not directly bear the impact and load of road undulation. Cars, SUVs, MPVs and other household scooters all adopt load-bearing structure, that is, there is no frame chassis, only the body frame is reserved; The torsional strength of such a car body is relatively low, and it is not suitable for heavy-duty and uneven roads.
The reason for explaining this knowledge point is that some mini-cars and even pickup trucks are also using this structure. For example, the most famous Wuling automobile's glory van, new van and journey pickup truck are all load-bearing. The rated load (non-overload load) standard of these cars is very low, and frequent extreme overload can easily cause body deformation; Therefore, it is not recommended to consider these small trucks, and the real trucks should still be found from the above brands.
Let's take a look at the micro-card level of several mainstream commercial vehicle brands, starting from Chang' an.
1: Chang 'an Shenqi T20 "2-seat single-row 3.6m board" is more representative. The rated load capacity of this car has reached 1.875t, which is quite high among mini-trucks.
The ultimate load is close to 3.5 tons, which is close to 7000 kilograms; This standard micro-card can be used not only for logistics express delivery, but also for agricultural and sideline products transportation. In terms of power, it is equipped with 1.5L Dongan gasoline engine, with a power reserve of 85kW/145n m. Matching with a five-speed manual gearbox can meet the heavy-load demand, and at the same time, the limited area of gasoline-powered micro-cards is less, so the micro-cards mainly used in urban roads are mainly gasoline engines.
2. Futian Xiangling M2 is also a pretty good micro-card, and its "3.3m board" single-row car has a rated load of1.8t. If you need a smaller micro-card, you can consider this car.
The limit standard of heavy load is also equivalent to Shenzhou VII T20, so its practical value is naturally high enough. The engine is Dong 'an DAM 16KL- 1.6L engine, and the standard torque exceeds150 N m. The gearbox is also Dong 'an 5-speed manual. This car has actually been used for some time, and the overall quality performance is not disappointing; In fact, there is no need to have any special brand preference for micro cards. Just choose this brand for any brand of micro-cards in the car. At least maintenance will be more convenient. Heavy-duty vehicles will inevitably have some faults. )
3. Jianghuai Kaida micro trucks are also mostly around Jiangsu, Zhejiang, Shanghai and Anhui. The rated load standard of this car's 3.8-meter single-row plate is 1.795 tons, but the ultimate bearing capacity of the mini-truck chassis and axle built by Jianghuai is still relatively strong.
Jianghuai has a high reputation and market share in the field of trucks, which is due to professional chassis manufacturing; Therefore, Jianghuai micro-card is often used to "do heavy work" and is more suitable for the logistics industry. The engine is a 1.6L gasoline engine developed by JAC, the standard is 88kw/155n m, and the gearbox is also 5-speed manual. This micro card can also be used as a reference.
Conclusion: Other brands of micro cards are not listed one by one, and the standards are basically the same. Just remember two things when choosing a mini-truck. If you want to choose non-loaded trucks, you should choose gasoline engines, which are mainly used in urban roads. The price of diesel mini-trucks is on the high side, so it is better to increase the budget and choose light trucks for professional operation.
When choosing a pickup truck, it is recommended to give priority to diesel engines, unless the family takes into account cross-country transportation, it is more appropriate to choose a gasoline pickup truck; These trucks with a total mass of less than 4.5 tons do not need to apply for double certificates, and they can drive normally and participate in operations with driver's licenses.
Published by Tianhe MCN, all rights reserved.
Buying a truck is not as complicated as buying a car brand. A car is not only for transportation, but also to meet face needs sometimes. Trucks are essentially production tools, and practicality is the first. Trucks are basically domestic brands with similar quality. Don't buy too small a brand. That depends on your rigid demand for trucks, how much you pull and how much you pull. Once again, Rado decides how much horsepower engine you want, how much tension you want, and how wide the container you want.
Also determine the model you want to buy. When you say minivan, you should mean blue minivan. Blue brand minivans have goods, trucks and warehouses. Each model has different usage characteristics. The goods are mainly used in cities or factories; Van is mainly used for supermarket distribution. And the warehouse is mainly used for short-distance logistics and transportation.
Of course, you can also choose the vehicle according to the characteristics of the goods you transport. It is convenient to load and unload goods, but transportation is limited in rainy days. The van is not limited by rainy days, but it is inconvenient to load and unload goods, and because of the size of the closed compartment, it cannot be loaded more. The best thing to load is the barn car. Because it is not a fully sealed carriage, it can still be packed if it is crowded a little more, and it will be affected in rainy days. Fortunately, it has a special poncho. Although there is an extra process of covering the poncho, it can really be installed. Without a stable supply of goods, small partners running all over the country will choose this model.
I'm also talking about general car recommendation. If you can explain your needs in more detail, I will give you a more targeted answer, hoping to help you.