1. The dimensions of the gate-shaped booth are: 60cm * 160cm, 80cm * 180cm, 120cm*200cm. Moreover, due to the different materials (metal base, water injection base) and colors, their values are also different.

2. The four corners of the door-shaped exhibition board should be fixed with springs. In design, in order to avoid visual impact, fonts and pictures should not be too low, and there should be a space of 3 to 5cm. The four corners should also be left blank to prevent the text from being damaged during drilling, resulting in incomplete display data.

3. Portal booths include: ordinary iron gate booths and water injection portal booths. The materials of the door-type booth are PVC and PP, but the prices are different because of the different materials (metal base and water injection base) and colors.

Extended data

1, door display cabinets are widely used in various shops and facades, especially photo studios. Because the door-type display stand uses spring hooks to fix the image in the frame, the design size of the image should be determined with reference to the size of the frame.

2. Door-type booth is a new product developed on the basis of X-type booth and Yi Labao. Its image is in the frame of an exhibition frame, and the four corners are fixed by springs, so the image can be replaced without disassembly, and it can also be enjoyed with the X exhibition frame. Because it looks like a door, it is called a door shape.

How to Install Portal Display Shelves

1. Take out all parts, including the door head, four round tubes, four hooks, a base and two wing screws.

2. Hang the hook on two round pipes and fix it on the top of the door.

3. Connect the two round pipes hanging on the hook to the bottom with butterfly screws and tighten them.

4. Connect the remaining two cylinders to the cylinder connected to the bottom. (If it is a small advertisement, you can pick it up directly.).

5. Connect the door end with the circular tube at the top. The portal display panel has been installed.