Current location - Plastic Surgery and Aesthetics Network - Wedding supplies - Simple general template for purchase and sale contract template
Simple general template for purchase and sale contract template
1. Simple version of the general template for the purchase and sale contract Part I

Party A (supplier): Party B (buyer):

According to the agreement between the two parties, Party B purchased the following products from Party A today:

1) inspection basis: the supplier shall produce products according to industry standards and specifications set by the buyer, and provide quality inspection reports and certificates (from the date of acceptance by Party B).

2) Time limit for acceptance: After receiving the goods, if there is no objection within fifteen days, it is considered that the goods of the supplier meet the requirements of the order.

3) Place and method of delivery: The goods shall be delivered to the delivery place designated by the buyer.

4) If Party B raises quality objections within the objection period, it shall be handled in the following ways:

1. Party A and Party B have reached an agreement on the quality of the goods, and Party A shall be responsible for the losses caused to Party B due to the quality defects of the goods.

2. If Party A and Party B cannot reach an agreement on the quality of the goods, they may entrust an appraisal institution recognized by both parties to appraise the quality of the goods, and bear corresponding responsibilities according to the appraisal results.

V) Matters not covered in the performance of this Agreement may be signed separately by both parties. In case of any dispute, both parties shall first settle it through consultation. If negotiation fails, a lawsuit can be brought to the Shenzhen People's Court.

6) This Agreement is made in duplicate, one for each party, and shall come into effect as of the date of signature and seal.

Party A (official seal): _ _ _ _ _ _

Party B (official seal): _ _ _ _ _ _

Legal representative (signature): _ _ _ _ _ _

Legal representative (signature): _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Simple version of the purchase and sale contract template general template 2

Supplier: (hereinafter referred to as Party A) xxx Utilization Co., Ltd. Demander: (hereinafter referred to as Party B) xx Co., Ltd.

Party B buys stainless steel plates from Party A for processing needs. In order to clarify the rights and obligations of both parties, the following terms are reached through equal and friendly consultations.

1. All stainless steel plates required for Party B's processing shall be purchased from Party A. Without Party A's written consent, Party B shall not purchase stainless steel plates from other channels, otherwise, Party B shall pay a penalty of RMB 500,000.00 Yuan to Party A, and Party A has the right to unilaterally terminate the contract.

2. Party B shall purchase the required stainless steel plates from Party A by stages. When Party B needs goods, it shall notify Party A of the specifications, models, quantities and origin of the required plates three days in advance. After confirmation by Party A, Party A shall deliver the plate to Party B's processing plant within 65,438+050 days. If Party A exceeds 0.3% of the futures price, Party A shall pay liquidated damages.

3. As the market price of stainless steel plate often changes, the price of each batch of goods is determined by both parties through friendly negotiation with reference to the market price on the day when Party A supplies it.

4. Acceptance method of plate: Party B shall inspect the goods after receiving them, and can use them only after they are qualified. If there are any quality problems, Party A shall be notified in writing within _5_ days from the date of receipt of the goods, and relevant inspection reports shall be submitted; otherwise, the quality of this batch of plates shall be regarded as completely qualified. After both parties confirm that the quality of steel products is indeed unqualified, Party A shall return the unqualified plates and bear the freight arising from the return, but Party A shall not bear other responsibilities, and Party A shall replace the qualified plates within 10 days.

5. Payment method: The payment method of the plates under this contract is: Party B must pay 80% of the total price of this batch of plates on the day when Party A's plates are delivered to Party B's processing plant. If Party B fails to pay the full amount on time in any period, Party B shall compensate three thousandths of the amount owed in the current period as liquidated damages.

6. Both parties shall strictly abide by this contract. If there is any dispute between the two parties, it should be settled through consultation first. If negotiation fails, it shall be decided by the people's court where the submitting party is located.

7. This contract shall come into effect after being signed and sealed by both parties.

8. This contract is made in duplicate. Party A and Party B each hold one copy.

Party A (official seal): Party B (official seal):

Representative of Party A: Representative of Party B:

Date of signing the contract: year month day.

3. There are three general templates for the concise version of the purchase and sale contract template.

Party A: Party B:

Based on the principles of equality, reciprocity, mutual benefit and common development, Party A and Party B have reached the following agreement on the purchase and sale of rice:

1. The term of this contract is from the date of the month to the date of the month. The supply shall not be less than100t per month.

2. Product name: variety and quantity, unit price, specification and model.

1, product name: rice (indica rice);

2. Variety: Taipingchuan Rice Yu _ _ _

3. Unit price: temporarily 5.25 yuan g, which will change with the market situation every quarter.

4. Specifications: 5g bag, 10g bag, 25g bag.

5. Product quantity: subject to the actual quantity.

Three, product grade, quality, standards and inspection methods

Product grade: Grade I, ensuring that the bagged rice meets the national standard GB1354-; If it is bulk rice supplied by farmers, ensure that the rice is pesticide-free, pollution-free, high-quality, safe and hygienic.

Fourth, product delivery standards.

Party A shall provide two samples, 5g in each bag, which shall be signed and sealed after being approved by both parties. Each party holds a sample, and Party B shall receive the goods according to the sample.

Verb (abbreviation for verb) settlement method:

After Party A's goods are checked and accepted by Party B's management, the safety and quality are qualified, and the quantity and amount are correct, both parties shall sign and confirm by the legal representative of Party B, and then pay by transfer or cash.

6. Packaging form: woven bag, 5g bag, 10g bag and 25g bag.

Seven. Place of delivery:

8. Delivery time: the delivery time agreed by both parties;

9. Mode of transportation: Party A will transport the goods to the place designated by Party B by special safety and health transport vehicles or through local logistics companies;

X. liability for breach of contract:

If either party breaches the contract, the breaching party shall compensate the other party for all economic losses caused by the breach.

XI. Party A and Party B shall take effect as of the date of signature, with each party holding one copy, which has the same legal effect.

Signature (seal) of Party A's representative:

Signature (seal) of Party B's representative:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4. Simple version of the purchase and sale contract template general template 4

Party A: _ _ _ _ _ _ _ _ _ _ _ Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

The date of this contract is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Article 1 List of products and expenses provided by Party B

________________________________。

Article 2 Packaging

Party B shall pack according to national standards. Any loss caused by poor packaging shall be borne by Party B. ..

Article 3 delivery date

From the effective date of this contract to the acceptance date.

Article 4 Place and Method of Delivery

1. Delivery place: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

2. Delivery method: Party B will transport the goods to the destination designated by Party A. When the goods are transported to the destination designated by Party A, Party B will be responsible for all matters including insurance and warehousing, and the related expenses have been included in the total contract price.

Article 5 Payment Terms

1. After this contract comes into effect, Party A shall pay _ _% of the total contract price to Party B as an advance payment within _ _ working days;

2. After Party A has accepted the products provided by Party B, Party B will issue the full sales invoice of the total contract price, and Party A will pay all the balance of this contract within _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Article 6 Quality Assurance and After-sales Service

1. The quality of Party A's products provided by Party B can be traced, and the product quality guarantee period is _ _ _ _ _ days, counting from the delivery date.

2. During the product quality guarantee period, if there is any product quality problem, Party A has the right to ask Party B to repair or replace it free of charge at any time; If Party A's personnel are improperly used, Party B shall also provide maintenance services in time, but Party A shall bear the travel expenses and material expenses of Party B's personnel.

Article 7 Modification of the Contract

Any change or amendment to the terms of this contract must be signed by both parties in writing. The changed contents have the same legal effect as this contract (except the modified part).

Article 8 Liability for breach of contract

During the performance of the contract, if Party B delays delivery and Party A delays payment, it shall be liable for breach of contract at _ _% of the date of non-delivery/non-payment, unless both parties agree to be exempted through consultation.

Article 9 Settlement of disputes

The execution of this contract or all disputes related to this contract shall be settled by both parties through friendly negotiation. If no settlement can be reached through friendly negotiation, either party may bring a lawsuit to the people's court with jurisdiction.

Article 10. Entry into force of contract and others

1. This contract shall come into effect after the signature of the authorized representatives of both parties, the seal of the unit and the advance payment reach the account designated by Party B. ..

2. The original of this contract is in quadruplicate, and each party holds two copies, which have the same legal effect.

3. If there are any matters not covered in this contract, both parties shall make supplementary provisions after consultation, and the supplementary provisions shall have the same effect as this contract.

Party A: (Seal) _ _ _ _ _ _ _ _ _ _ Party B: (Seal) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Legal representative: _ _ _ _ _ _ _ _ _ _ _ Legal representative: _ _ _ _ _ _ _ _ _ _ _

Date of signing: _ _ _ _ _ _ _ _ _ _ _ Date of signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5. Simple version of the purchase and sale contract template general template Chapter 5

Party A (demander): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Party B (supplier): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Based on the principles of voluntariness, equality, mutual benefit, honesty and credibility, Party A and Party B have reached the following terms of the contract through full friendly negotiation, so that both parties can abide by them.

I. Subject matter of the contract

The product name purchased by Party A is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. See the list for detailed equipment configuration. Equipment not listed in the list is not included in the scope of supply of this contract. If Party A needs it, it will be priced separately.

Second, the contract price and payment method

1, and the total contract price is RMB (in words).

2. Pay a deposit of _ _ _ _% of the total price after signing the contract;

3. Pay _ _ _ _% of the total price after purchasing the equipment delivered by the recipient;

4. The quality guarantee fund is _ _ _% of the total price, and shall be paid within _ _ _ _ _ months after the equipment debugging is qualified.

III. _ _ _ _ _ _ _ _ _ _ _ _ in equipment transportation and risk taking

1. Party B consigns the goods on behalf of Party A, and Party A pays the freight directly to the transportation unit before unloading the equipment. Party B shall be responsible for loading the car and bear the risks before loading, and the risks after loading shall be borne by Party A;

2. Party B delivers the goods to the door and bears the freight, while Party A is responsible for unloading; The risks before unloading shall be borne by Party B, and the risks after unloading shall be borne by Party A. ..

Four. Delivery of equipment

1. delivery time: the seller shall deliver the goods in _ _ _ batches within _ _ _ months after the contract comes into effect.

2. The seller shall fax the relevant contents of the contract equipment to the buyer before the delivery date, so that the buyer can prepare for receiving the goods.

Verb (abbreviation of verb) Equipment acceptance

1. The equipment shall be accepted at the same time of delivery, and Party A shall sign for it on the acceptance sheet after confirming that the equipment and its ancillary equipment are correct;

2. If the product is found to be unqualified, it shall raise a written objection to Party B within days.

Data transmission of intransitive verbs

The seller shall mail the drawings, materials, technical documents and other technical materials related to the contract equipment to the buyer within _ _ _ _ months after the contract comes into effect.

Seven, after-sales service

1. Party B provides technical support and services for installation, debugging and maintenance;

2. Party B shall provide free on-site warranty service for 12 months from the date of acceptance. If the product is damaged due to quality problems during the warranty period, Party B shall be responsible for replacing it free of charge;

3. Equipment damage caused by wearing parts, human factors and material corrosion (phosgene, hydrofluoric acid, more than 40% NaOH, KHO concentrated solution) is not within the scope of free service.

Eight. force majeure

When the performance of this contract is affected by fire, drought, earthquake, war and other force majeure accidents agreed by both parties, the performance period of this contract may be extended or terminated, and the liability for breach of contract may be partially or completely exempted as appropriate.

Nine. responsibility for breach of contract

1. If Party B delays the delivery for one day, Party B shall pay _ _ _% of the total value of the products not provided, which shall not exceed _ _ _% of the total contract price;

2. Where Party A delays payment, it shall bear _ _ _ _ _% of the total overdue payment as liquidated damages from the day after the due date, and the liquidated damages shall not exceed _ _ _ _% of the contract amount.

X. Settlement of disputes

In case of any dispute arising from the performance of this contract, if negotiation fails, the following option shall be adopted for settlement.

1. Apply to the Arbitration Commission for mediation and arbitration;

2. Bring a lawsuit to the people's court of the plaintiff's domicile.

Party A (signature): _ _ _ _ _ _ _ _ _ Party B (signature): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Address: _ _ _ _ _ _ _ _ _ _ _ _ Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Legal representative: _ _ _ _ _ _ _ _ _ _ _ Legal representative: _ _ _ _ _ _ _ _

Authorized Agent: _ _ _ _ _ _ _ _ _ _ _ Authorized Agent: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Date of signing: _ _ _ _ _ _ _ _ _ _ _ Date of signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _