1. Prepare materials, tools and raw materials, such as cloth, ribbon, iron wire, needle and thread, scissors, double-sided tape, hair clips, etc.

2. Then cut the cloth into 7 times14cm, 7 times10cm and 2 times 6cm.

3.7 times 14cm Plaid cloth with double-sided tape in the middle.

4. After being glued in half, stick the double-sided adhesive tape vertically in the middle of the cloth.

5. Fold it in half and stick it on.

6.7 times 10 cm cloth is also done.

7. Tie a bow with wire or sew it with needle and thread. Put the small bow on the big bow and sew it firmly with needle and thread.

8. Stick double-sided adhesive tape 6 cm on the cloth twice, then fold it in half and stick it firmly.

9. Wrap the newly made small cloth around the wire and fix it.

10. Finally, fix the hairpin behind the bow with 502 glue, and it is ready.

The second step of making a bow:

1. Draw a circle with a piece of discarded cardboard. If you think the painting is not good, you can draw it with tape or the bottom of the cup, which will be more round.

2. Nail the finished circular piece of paper and the rag head together, so that the cut circle looks better. Just cut two circles.

3. Fold the circular cloth into a semicircle, and then cut it into semicircle cloth heads along the line.

4. Fold the semi-circular cloth head in half, and it becomes a quarter circle. Then sew four quarter circles along the curved edge with needle and thread, and sew them back and forth several times, and the effect will be very good. Then tighten the thread, tie the knot and tidy it up. This is the wing of a butterfly.

5. Make a butterfly's body with the remaining cloth head, and find a long cloth head. It doesn't need to be very long, and the feeling can be wrapped around the wings of the butterfly just made.

6. Let's wrap this long piece of cloth in the middle, fix it with a few stitches and tidy it up a little, and a lifelike butterfly will be made.