First, the tutorial steps and instructions of indoor ceiling 1 First of all, the tutorial of indoor ceiling is to ensure that the ceiling installation materials and tools are complete, the installation pipes are clearly installed, and the structural dimensions are consistent with the preliminary design drawings before the ceiling construction is prepared.
2. Primary smallpox therapy;
Be sure to check the ceiling before installation. If the quality does not meet the building requirements, measures must be taken immediately. This is a protective measure for indoor ceiling.
?
3. Draw a line on the ceiling
The ceiling height line and keel are marked separately. Elevation can be used to indicate the position of the ceiling plane in the water column, and the height line pops up according to the position. The position of keel is set according to the size of plywood and the position of keel. For the convenience of installation, it is suggested that the center line spacing of plywood size should be set to about 2 mm When placing the keel, the uniformity and integrity of the keel frame should be ensured, so that the ceiling has a more regular decorative effect. Firstly, according to the principle of keel arrangement, the ceiling area on the drawing is scaled and the ceiling keel is arranged on the paper. Please put it on the wall after you determine the location. This part is also very important in the indoor ceiling course.
4. Fixed floating frame
Pendants are usually fixed with expansion screws or nails, and keel hooks are fixed on pendants with galvanized steel wires through holes in angle steel blocks. We suggest using telescopic boom material as suspension. The types of telescopic arms are further diversified. Usually, the No.8 conductor is straightened and the two conductors are connected by a perforated spring steel plate. Adjustment and fixation are mainly made of spring steel. This is also one of the indoor ceiling tutorials.
5. Please install the keel.
The keel has a main keel. You can measure the keel spacing with a mold measuring instrument. Lift each main keel first, and then temporarily fix it above the elevation line. If the ceiling area is slightly larger, it is recommended to roll up several parts. Then, an auxiliary keel, called a horizontal keel, is installed between the main keels. Measure the length with a mold measuring instrument and complete the installation manually. This is the main course of the indoor ceiling.
Conclusion: This paper introduces the installation and explanation of indoor ceiling course, hoping to help you.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~