First, the purchase strategy of decoration washbasin
Pay attention when buying a basin: the basin is too shallow and will splash; The basin is too deep and may be inconvenient to use; Only consider practicality and look uncomfortable; If the design is too flashy, it will inevitably usurp the role of the host. If the bathroom area is small, generally buy a basin; If the bathroom is big, you usually buy a basin with a homemade countertop. But at present, it is more popular to directly match the countertops or bathroom cabinets customized by bathroom manufacturers, with rich and sophisticated technology, saving time and effort. However, when designing bathroom cabinets or countertops, manufacturers usually use wall drainage to improve the taste and value of products. Therefore, it is best to buy it before the bathroom wall treatment, so as to modify the water, reserve the pipeline, and prepare for the product installation, so as to avoid rework or the product that you like cannot be installed. Moreover, such products often have a certain ordering cycle, and they also need to be ordered in advance to avoid delaying the construction period.
For ceramic pots, consumers should pay most attention to the quality of glaze, because good glaze is not dirty, the surface is easy to clean, and it is as bright as new after long-term use. When choosing, you can look at the light side of ceramics from multiple angles. A good glaze should have no spots, pinholes, sand holes and bubbles, and the surface is very smooth.
Water absorption is an important index of ceramic basin. Generally speaking, ceramic products have certain adsorption and permeability to water, and the lower the water absorption, the better. Because water is sucked into the ceramics, the ceramics will expand to a certain extent, and it is easy to crack the glaze on the surface of the ceramics due to the expansion, and it is also easy to suck dirt and odor in the water into the ceramics, which will produce an odor that cannot be removed over time. According to national regulations, sanitary ceramics with water absorption less than 3% are high-grade ceramics.
As for the glass basin, Bian Xiao of Tuba Rabbit suggested that if the economic conditions permit, it is best to choose a product with a wall thickness of 9mm, because it can withstand the relative high temperature of 80℃ and has good impact resistance and breakage resistance. Because the cost of glass basin is high from process to design, the price is also relatively expensive. It is appropriate for consumers to shop around when choosing the same product, but the strength and reputation of the manufacturer should also be considered.
In addition, according to the actual situation of the bathroom and personal preferences, there are several ways to choose the washbasin:
◆ Desk basin: easy to install, and items can be placed on the marble countertop.
◆ basin: easy to clean, high grade, and can be used for placing items on marble countertops. The installation requirements of the basin under the platform are relatively high, and the size of the reserved position of the countertop must be consistent with the size of the basin, otherwise the appearance will be affected after installation.
◆ Column basin: It has the characteristics of consistent color of basin and column, no space occupation, simple installation, easy cleaning and good ventilation performance.
◆ Hanging basin: Simple style, similar to vertical basin, suitable for wall-mounted drainage system.
In addition, when choosing a basin, you should also pay attention to:
Ⅰ) ① The length and width of the basin top should be greater than 75cm and 50cm, which is more effective in terms of safety and vision.
② The semi-embedded basin does not occupy too much sanitary space, but the linear distance between the outer edge of the table top and the opposite side of the basin should not be less than 70cm.
③ The basin under the platform is cheap and easy to clean, but it is inconvenient to install and maintain. A support frame must be installed at the bottom and fixed on the wall, which is complicated to disassemble and assemble.
(4) hanging basin wall must be a load-bearing wall, otherwise the wall thickness must be above 10 cm.
Ii),1.When choosing a ceramic basin, you should observe the reflection of the surface under strong light, so that some small sand holes and defects will be clear at a glance.
2. Feel smooth and delicate.
3. In terms of price, pots below 500 yuan belong to middle and low-grade products. This kind of basin is economical, but the color and shape have not changed much. Most of them are made of white ceramics, mainly oval and semicircular. 1000 yuan to 5000 yuan ceramic pots belong to high-end products. The products at this price are fine in workmanship, and some have supporting towel racks, tooth jars and soap dishes. The humanized design is in place.
4. According to the installation requirements of main products, some pots should be fixed on the wall, and the pots should be fixed on the wall with expansion bolts. If there are many pipes in the wall, this basin is not suitable.
5. Besides, you should also check whether the return pipe bend of the basin, the water pipe on the faucet of the basin, the angle valve and other main accessories are safe.
The above is an example to introduce all kinds of information about washbasin decoration, including selection and construction, strategy or method. It can be seen that although there are many washbasins in the market, which can provide a series of rich choices according to the size and specifications, considering the factors of materials and cost performance, as ordinary consumers, it is especially necessary to shop around, formulate appropriate plans, eliminate unqualified bad manufacturers, and do their best to ensure satisfactory results, which can also be avoided.