Bamboo weaving octagonal weaving is a relatively basic bamboo weaving method, and the following is the specific weaving method:

Materials:

Bamboo or bamboo knitting needles

Bamboo or rope

Steps:

Cut bamboo strips or ropes according to the required length and tie one end to a table or other flat surface.

Starting from one side of the knot, the other end will bypass the bamboo strips or ropes one by one, and rotate 90 degrees to the right or left each time around an intersection.

After winding at the end of bamboo or rope, it rotates 90 degrees and pulls through the intersection to form an octagonal eye with the original bamboo or rope.

Then, the bamboo strip or rope is wound around the newly formed intersection and the next intersection, and passed through it, and the above steps are repeated until the required length is reached.

When finishing is needed, bamboo strips or bamboo ropes are pulled through the intersection rotated by 90 degrees to form a knot and fixed on the surface of bamboo woven products.

Precautions:

When you bypass each intersection, keep the bamboo strips or ropes in the same direction.

Please click to enter a picture description.

In order to ensure that bamboo woven products are beautiful and generous, we need to be careful and patient in the whole weaving process and constantly adjust and improve them.