The manufacturing process of fan bone and folding fan bone is as follows: after designing the shape and specifications of the fan to be made, select acacia slices with circular arcs, and both sides of the same fan bone should be the same bamboo, divide the slices into bamboo slices with equal thickness with crescent knife, then punch holes, and wear them into 3-5 pairs with bamboo sticks as a group. Anyway, each group should be put on with a template, cut with a knife, hung and inverted to make a big edge, and the size should be according to the specifications.
Little bones for fans. After the big bones are preliminarily made, they begin to make small strips. The number of fan ribs with different sizes is different. The studio should pay special attention to chopping them into thin slices and making them into strips, and put big eyes on them. The key is that the width of the small strip must be the same as the width of the big side, and the thickness of the copper fan strip should be uniform.
Polishing: After the basic shape of the fan is finished, gently polish it with sandpaper, and the amount of sandpaper will be thinner each time. In the past, wood silk grass was all milled with water, but now sandpaper has thousands of meshes, which is very convenient and does not leave traces when it is milled sideways.
Drying: When the weather is fine, put the prepared fan bones in the sun for a long time. Be careful not to let dirty things, leaves, etc. Fall on them, or there will be a shadow when they do it.
Polishing: start polishing after drying in the sun, and gently polish the polished fan with a clean cotton wheel. It looks moist as jade and feels smooth as agate. You can also use cotton cloth instead of cloth wheel for polishing, and the effect is also very good.
Assembly: finally, assemble and lock a fan bone according to the specifications. Ebony, mahogany and other materials are basically the same, but due to different textures, attention should be paid to mastering the characteristics of materials when making.