First of all, set four bases at the approximate position of the ground, and adjust the lower support legs to make them a horizontal plane.
Two, the four corners of the outside of the base penetrate into the lower part of the inclined bracket, and two * * * eights are inserted into each part.
Third, fix the head guard on the base with screws, and the rotation direction of the head guard should be consistent with the figure.
Fourth, put a square at the back.
Fifth, the beam connecting the ground.
Sixth, the two ends of the beam are separated, and the two square sleeves at both ends are connected well. At this time, the beam components are assembled on the ground.
Seventh, connect the column truss horizontally, and then screw one end in the middle of the back and the other end on the crossbar. The gourd is connected with the cross. The hoist is used to lift the beam truss below.
Eighth, put the column truss together step by step. Be careful not to push the column hard, and then fix the screw at the other end.
Ninth, after the column is erected, the hook below the hoist is hooked with the beam below through the sling.
Tenth, until four people gradually pull up the crane and pull the beam over their heads.
Eleven, install lighting and audio equipment on the beam.
Twelve, four people pull the crane to a predetermined height.
The aluminum alloy stage lamp holder is mainly composed of base, aluminum alloy truss, inverted head, diagonal brace, square sleeve, horizontal rod, winch (hand-pulled or electric) and so on.
Stage lighting frame: mainly used to stabilize the whole frame.
Stage lighting lens: used to create a higher height and reach a higher height through the head.
Stage lamp bracket diagonal brace: used to support the stability of the whole aluminum alloy truss system.
Square cover of stage light frame: The height of light beam can be easily adjusted through the square cover.
Stage light frame crossbar: at the top of the truss, mainly on the sling crane.
Stage light frame crane: divided into chain block and electric hoist, used to hoist aluminum truss.
Stage lighting bracket sling: the connection between elevator and aluminum alloy truss.
Shanghai Jiali Conference is mainly devoted to: Shang Yan,
The exhibition, conference, various celebrations and service industries, which mainly focus on the planning of large and medium-sized cultural performances, include professional stage construction, lighting, audio-visual system engineering, audio-visual lighting engineering production of mobile performances, audio-visual equipment, lighting and other equipment leasing, exhibitions, graduation celebrations, dance design, planning and implementation, etc.
Over the past 20 years, Kerry has trained professional management team, planning team, creative team, design team, project team, media team, execution team, technical team and engineering team, and accumulated 654.38 million+successful planning and execution cases, thus establishing global social resources, industry expert resources, media resources, host resources, star resources, performing arts resources, hotel resources and welcome reception.