The usage of tent telescopic pole is to take out the pole and open it. Connect them with elastic ropes, and then insert them into another pole one by one, and then insert them obliquely into every pocket outside the tent. After inserting two poles, four fixing nails are fixed on the ground, which is not afraid of being blown away by the wind.

How to fix the canopy strut with wind rope?

Step 1: Thread the non-slip end of the tent rope into the buttonhole of the tent, fasten it, and then start to adjust the sliding end.

Step 2: Pull out the loop rope near the tail of the tail rope in the slider and cover the ground nail. No matter what kind of nails you use, they are used for tightening.

Step 3: Choose the location of the ground nail according to the ground conditions. Generally speaking, the smaller the angle between the wind rope and the ground, the better the wind resistance of the tent. Insert the nail into the ground at an oblique angle of 45-60 degrees to maximize its strength.

Step 4: Tighten the front end of the wind rope with one hand, and hold the three-hole slider with the other hand to push it closer to the tent end. Tighten it hard, the tighter the better.

Step 5: Release your hand. If the rope of the whole tent is still tight, it means that the wind rope is set. If it is found to be loose, you can continue to tighten it according to the above method.