Current location - Plastic Surgery and Aesthetics Network - Wedding planning company - What are the good materials for tents?
What are the good materials for tents?
Question 1: What kind of material is better for camping tents? Materials can be divided into fabrics, linings, backings, pillars and so on. Generally speaking, the fabric of the same label has different densities, so the tensile strength and waterproof pressure are also different.

On the fabric of camping tent

Compared with different fabrics, nylon yarn is thin and light, suitable for mountaineering and hiking. Oxford cloth is thick but heavy, suitable for driving camping or small group tents. From the perspective of waterproof coating, although PVC is waterproof, it will become hard and brittle in winter, and it is easy to crease or break. PU coating can not only overcome the defects of PVC, but also be waterproof. The waterproof pressure of PU coating for many times can reach more than 2000 mm ..

About the lining of camping tents

The lining of tents (materials in tents) is usually made of cotton nylon yarn with good air permeability. From the use point of view, the performance of nylon yarn is better than that of cotton cloth. Camping in the wild, tents are easy to absorb moisture, cotton cloth is easy to get moldy if it is not aired well, and nylon silk is easy to dry and not moldy.

About the bottom material of camping tent

The main function of tent bottom is waterproof, moistureproof and dustproof. The choice of the bottom material also determines the grade of the tent. Low-grade tents usually use PE as the bottom material, and PVC is also useful. What is needed is low-cost PE with double-sided film covering. Although it has waterproof and moisture-proof function, it is easy to wear and leak. Winter is the bane of PVC substrate. As a substrate, PU coated Oxford cloth is stronger, more cold-resistant and waterproof than PE.

About poles of camping tents.

Reinforcing material pillar:

The poles of the tent are the skeleton of the tent, and the quality of the skeleton material not only affects the life of the tent, but also affects the stability of the tent. The early tent poles were mostly made of reinforced materials, which not only increased the weight of the tent, but also had poor resilience.

Glass fiber pillar:

The improved tent frame uses fiberglass poles, which have reduced weight, improved elasticity and lower cost. Therefore, most tent manufacturers use this material to make poles, but the strength and firmness of glass fiber poles are not ideal. If the strength is increased by thickening the glass fiber rod, the weight will also increase.

Aluminum alloy pillar:

The ideal pillar is made of aluminum alloy. Pillars connected with high-strength alloy pipes not only have high strength, but also have light weight and good resilience. Especially the Easton pole made of aerospace aluminum has reached an excellent state and is the first choice for high-grade tents.

Summary: The main performance indicators of camping tent quality are generally wind resistance, rain resistance and good stability. Alpine tents also require light weight and small size. A high-performance alpine tent is usually a tear-proof structural fabric woven from high-quality nylon yarn, plus a waterproof coating with a waterproof degree of more than 2000 mm. During the production process, the joints are glued to ensure that you are not disturbed by wind and rain in a rainstorm environment.

Question 2: What is the material of the tent, which is better, alloy or alloy? The material is light, and it will be much more comfortable if it can be light outdoors. Plastic is fragile and not durable. There is no temperature requirement.

Question 3: What material is good for camping tents? The materials of camping tents can be divided into fabric, lining, bottom material and poles.

1, fabric

Compared with different fabrics, nylon yarn is thin and light, suitable for mountaineering and hiking. Oxford cloth is thick, but heavy, so it is suitable for driving camping or small group tents. From the perspective of waterproof coating, although PVC is waterproof, it will become hard and brittle in winter, and it is easy to wrinkle or break. PU coating can not only overcome the defects of PVC, but also be waterproof. The waterproof pressure of PU coating for many times can reach more than 2000 mm

2. Lining

Lining (lining material) usually adopts cotton nylon yarn with good air permeability. From the use point of view, the performance of nylon yarn is better than that of cotton cloth. Camping outside, tents are easy to absorb moisture, cotton cloth is easy to get moldy if it is not cooled well, and nylon yarn is easy to dry and not moldy.

3. Substrate

The main function of tent bottom is waterproof, moistureproof and dustproof. The choice of the bottom material also determines the grade of the tent. Low-end tents are generally made of PE.

Some substrates are PVC, and they want low-cost double-coated PE. Although it has waterproof and moisture-proof function, it is easy to wear and leak, and winter is the bane of PVC substrate. As a base material, PU coated Oxford cloth is much stronger, cold-resistant and waterproof than PE.

4, stay rod

The pole of the tent is the skeleton of the tent. The quality of skeleton material not only affects the life of the tent, but also affects the stability of the tent. The early tent poles were mostly made of reinforced materials, which not only increased the weight of the tent, but also had poor resilience. The improved tent frame uses glass fiber pillars, which have reduced weight, improved elasticity and lower cost. So at present, many tent manufacturers choose this material as the pillar, but the strength and firmness of glass fiber pillar are not ideal. If the pillars are thickened to increase strength, they will also increase weight. The ideal pillar is made of aluminum alloy. Pillars connected with high-strength alloy pipes not only have high strength, but also have light weight and good resilience. In particular, the Easton pillar made of aviation aluminum has reached an excellent state, so it is mostly used in high-end tents.

Question 4: A good tent aluminum pole-what is the material of aluminum pole? The tensile strength is above 600mpa, the yield strength is above 540mpa, and the hardness is above 19. Light weight, easy to carry after folding.

Question 5: What fabric is the most waterproof for tents? Generally speaking, polyester is thin and light, with high strength, good elasticity, wear resistance and corrosion resistance, and is suitable for mountain climbers and hikers.

Oxford cloth is thick but heavy, so it is suitable for making large tents for driving camping or small groups.

2. From the perspective of waterproof coating, although PVC (polyvinyl chloride) is waterproof, it will become hard and brittle in winter, and it is easy to crease or break; PU coating can not only overcome the defects of PVC, but also have good waterproof effect.

3, silver-plated material, can prevent ultraviolet rays, mainly used for leisure beach tents, sunshade tents, advertising tents, etc.

4. Some ultra-light accounts are popular now. Different from the previous waterproof principle of PU coating on nylon and polyester fabrics, it adopts the technology of coating silicon (silicone resin), which is much lighter, but more expensive.

Second, lining:

As for the inner curtain, it usually has two functions, namely, heat preservation, moisture permeability and mosquito prevention. Because of the previous consideration, polyester taffeta is usually used, which has good air permeability and certain heat preservation ability. But if only mosquito control is needed, then gauze is enough, and high-density gauze is better. If it's a four-season tent or a mountain tent, then there is no doubt that all the inner tents are kept warm with polyester taffeta. If it's a tent or a single account in summer, it's almost gauze for cooling and ventilation. For the usual three-season account, this is a compromise and pragmatic choice, with gauze and polyester taffeta each accounting for a part.

Third, the bottom material:

The main function of the tent bottom is waterproof, moistureproof and dustproof, and the choice of the bottom material also determines the grade of the tent.

1, PE coating bottom material, low price, commonly used in low-end tents at present, but it is easy to break after being folded many times.

2, PU coating primer, both wear resistance and water resistance are much higher than PE primer, with high cost performance.

Fourth, the fabric specifications

D: Denier number, where G is the weight (grams) of silk thread and L is the length (meters) of silk thread, which is used to represent the weight of yarn woven into this fabric. The gram weight of a single yarn per 9000 meters is the D number of this fabric. The larger the number before D, the thicker and heavier the fabric fibers with the same area. Usually 150D or 70D Oxford cloth is selected for tents, and the cost/weight/wear resistance are comprehensively considered.

T: Dacron taffeta is a silk-like fabric, which is used to make the outer and inner layers of tents. Light and strong, such as 190T. The number in front represents the sum of the number of weft yarns (density) in 1 inch (2.545CM), which is actually a density unit. The bigger the number before t, the bigger the area.

As for the external account, considering its fragility in harsh environment, we should pay attention to whether it adopts tear-proof structure and is simply woven into a small square. Even if a point is damaged, it will not get bigger and bigger in strong wind.

Question 6: What kind of cloth should I use to make a tent? The thicker the fabric, the better. Generally, 420D fabric is used. Search Feng Yushun for details.

Question 7: What kind of tent is good? First, good reputation and continuous improvement of design; Now the operation is simple, avoiding a series of problems that will appear before; Just like the newly launched cloth, commonly known as unbreakable cloth, it was appreciated by the first customers.

Second, the quality of materials is good: the support has strong wind resistance; The top cloth can resist tearing and effectively block ultraviolet rays.

Third, the space is small but practical. It can be said that you can see it as long as you do publicity activities.

Fourth, the price is not expensive, which saves a lot of money than promotion in new media.

5. Good printing (the font is clear, even if different printing methods are used, the effect is bright and has visual impact). We have 15 years experience in tents.

Question 8: What kind of automatic tent is better? Automatic tents are currently divided into the following categories:

1, drawstring automatic pole, this is the first generation of automatic tent. This kind of tent is very hard to build and collect, which requires great efforts. Not very convenient. There are camels in the delegate's tent.

2. Spring-type automatic pole, which is the second generation automatic tent. This kind of tent is easier to use than pulling rope, but it is still relatively difficult to take up the pole and it is easy to pinch hands. Representative tents are Elop and camels.

3. Hydraulic automatic pole, which is the third generation of automatic tent. This kind of tent is more convenient to use and build than the first two kinds. But if you put your hand in the wrong position when you put it, the pole will break easily. If the wind is stronger, the tent will collapse. This representative tent has brands such as camels.

4. "One-button" automatic lever. This is the third generation automatic mast. It is relatively new at present. One-click use and collection are very convenient. Basically solved the problems in the previous sections, and it is light and convenient to use and build. The tents of this representative include YOLAFE, Yolefe and so on.

Foreigners prefer DIY and do it yourself. Therefore, ordinary tents with poles are popular abroad. China prefers automatic simple tents.

Question 9: What is the most suitable material for tent support rods? At present, tents on the market are mostly made of aluminum alloy and glass rods. Compared with aluminum alloys, they are better in weight, toughness and compression resistance. There are 700 1, 700 1-T6, 7075, 7 178 in the market, of which 700 1 is adopted. If you can use aluminum poles, it will generally be two-layered, and waterproof will definitely be done. It's just that the price should be difficult to meet your requirements. How many people do you want? There are about 200 to 400 tents for two people on the market now. I wonder if there is Taobao. I suggest you buy it in an outdoor store. The quality can be guaranteed. I hope my answer is helpful to you.

Question 10: What kind of tent is good? Tent: A double-decker tent is a necessity for personal use. When it's hot, just use the tent inside. It's so cool. When it's cold, hang an external account to keep out the wind and rain. Of course, the price of the double deck is slightly higher. Low-priced brand tent: Mugaodi, I think it is very cost-effective (highly recommended). Camel brand is also very good, old brand, things are very real, but it is ridiculously expensive. You must buy it if you have money.

There is also a tent pole. Personally, I suggest buying aluminum poles, which are durable and worry-free, and are about 60 yuan more expensive than glass poles.

Sleeping bag: I think it's best not to bring coral fleece blankets or other convenient personal use. I think sleeping bags are good. I think it's Luxe (Lors), which is a bit expensive. So can Kitayama Wolf and Lucano.

At present, brands are basically valued when buying outdoor products. You'll know how to choose after using it.