1. Prepare the chair maintenance tools. General materials and tools needed for the repair of solid wood chairs: rubber hammer (used when knocking on the wood surface), wool brush, bicycle inner tube, emery cloth, white glue, rag, second primer, varnish, banana oil, etc.

2. After preliminary inspection, it was found that the tenon of the chair fell off or the surface was damaged and dirty.

3. Coat the protruding part of the tenon with white glue, and then put the tenon coated with white glue back to its original position. If necessary, you can use a rubber hammer to help put it back.

4. Reinstall the tenon part of the chair to its original position with a hammer.

5. Then use the inner tube to tie the whole chair back and forth at the tight position, then use a rubber hammer to knock the tight part tightly, and finally use a wet rag to clean the excess white glue, so that the chair will not come loose and shake.

Chair maintenance instructions:

1. For the newly bought leather chair, first soak the towel with clear water, wring it out and wipe off the dust and dirt on the chair surface, and then gently wipe the leather surface with nursing agent once or twice (don't use wax-containing nursing products) to form a protective film on the leather surface, so that the dirt will not easily penetrate into the dermal pores in the future, which is convenient for future cleaning.

2. Avoid sharp scratches on leather.

3, avoid oil stains, ballpoint pens, ink and other dirty leather chairs. If you find stains on the leather of the chair, you should immediately clean it with leather cleaner. If there is no leather cleaner, you can gently wipe the stain with a clean white towel with a little alcohol, then dry it with a wet towel, and finally care with a protective agent.