1. Preparation materials: printed cotton and linen, embroidery thread, embroidery needle, needle threader, mini embroidery rope, small bell, filled herbs or cotton.
2. Embroidery begins with stretching, and the whole word uses the most basic stitch-satin embroidery.
3. After the embroidery is finished, apply the edge-locking liquid around it, and after it is completely dried, cut the embroidery piece along the line. The front and rear panels are fixed with side seams, and the front and rear panels are fixed with side seams. Pay attention to leave a filling port.
4. After filling herbs or cotton, sew the filling port, and then install accessories.
Extended data:
The satin embroidery method comprises the following steps:
1. Satin embroidery usually starts from the center, the needle is drawn from the middle of one side of the leaf, and the needle is inserted on the other side of the leaf.
2. Take out the needle next to the exit point of the last needle and insert the needle next to the entry point of the last needle. The exit point and the entrance point should be on the same side of the embroidery line.
3. Repeat the above steps until half the edge of the pattern is embroidered.
4. Embroider the remaining half of the pattern in the same way.